JVC JY-VS200U JY-VS200U User Manual -- Pages 66-95 (616KB) - Page 13

Memory Play

Page 13 highlights

78 EN TROUBLESHOOTING (cont.) SYMPTOM 35. During recording, sound cannot be heard. 36. Play, Rewind and FastForward functions do not work. 37. A memory card cannot be played back. 38. The tape is moving, but there is no picture. 39. The LCD monitor image is distorted. 40. Images on the LCD monitor are jittery. 41. There is no playback picture on the connected TV. 42. Blocks of noise appear during playback, or there is no playback picture and the screen becomes blue. 43. The LCD monitor, the viewfinder and the lens have become dirty (ex. fingerprints). POSSIBLE CAUSES 35. •The optional headphones are not connected to the headphone connector. •The sound volume of the headphone connector was not adjusted appropriately. The sound volume at this point is the same as the level it was adjusted to during playback. 36. •The Power Switch is set to " " or " ". •The D.S.C. playback mode is engaged. 37. • The Power Switch is set to " " or " ". •The D.S.C. playback mode is not engaged. 38. • Your TV has AV input terminals, but is not set to its VIDEO mode. •The cassette holder cover is open. 39. •During playback of the unrecorded portion, Highspeed Search and still playback, LCD monitor indications appear distorted. This is not a defect. 40. •The speaker volume is too great. 41. •Since the analog input mode is engaged, the camcorder is in the Record-Standby mode. 42. ---- 43. ---- CORRECTIVE ACTION 35. •Connect the optional headphones to the headphone connector (੬ pg. 82, 83). •Adjust the sound volume during playback (੬ pg. 40). 36. •Set the Power Switch to " " (੬ pg. 40). •Press MEMORY PLAY to disengage the D.S.C. playback mode (੬ pg. 44). 37. •Set the Power Switch to " " (੬ pg. 44). •Press MEMORY PLAY (੬ pg. 44). 38. •Set the TV to the mode or channel appropriate for video playback (੬ pg. 54, 55). •Close the cassette holder cover (੬ pg. 12). 39. ---- 40. •Turn the speaker volume down (੬ pg. 40). 41. •Set "S/AV INPUT" to "OFF" in the Menu Screen (੬ pg. 41). 42. •Clean the video heads with an optional cleaning cassette (੬ pg. 90). 43. •Wipe them gently with soft cloth. Wiping strongly can cause damage (੬ pg. 80). JY-VS200U EN 66-95 78 01.3.12, 7:31 PM

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30

78
EN
SYMPTOM
POSSIBLE CAUSES
CORRECTIVE ACTION
35.
During recording, sound
cannot be heard.
36.
Play, Rewind and Fast-
Forward functions do not
work.
37.
A memory card cannot be
played back.
38.
The tape is moving, but
there is no picture.
39.
The LCD monitor image is
distorted.
40.
Images on the LCD
monitor are jittery.
41.
There is no playback
picture on the connected
TV.
42.
Blocks of noise appear
during playback, or there is
no playback picture and
the screen becomes blue.
43.
The LCD monitor, the
viewfinder and the lens
have become dirty (ex.
fingerprints).
35.
• The optional headphones are
not connected to the
headphone connector.
• The sound volume of the
headphone connector was
not adjusted appropriately.
The sound volume at this
point is the same as the level
it was adjusted to during
playback.
36.
• The Power Switch is set to
” or “
”.
• The D.S.C. playback mode is
engaged.
37.
• The Power Switch is set to
” or “
”.
• The D.S.C. playback mode is
not engaged.
38.
•Your TV has AV input
terminals, but is not set to its
VIDEO mode.
• The cassette holder cover is
open.
39.
• During playback of the
unrecorded portion, High-
speed Search and still
playback, LCD monitor
indications appear distorted.
This is not a defect.
40.
• The speaker volume is too
great.
41.
• Since the analog input mode
is engaged, the camcorder is
in the Record-Standby mode.
42.
————
43.
————
35.
• Connect the optional
headphones to the
headphone connector
(
±
pg. 82, 83).
• Adjust the sound volume
during playback (
±
pg. 40).
36.
• Set the Power Switch to
” (
±
pg. 40).
•Press
MEMORY PLAY
to
disengage the D.S.C.
playback mode (
±
pg. 44).
37.
• Set the Power Switch to
” (
±
pg. 44).
•Press
MEMORY PLAY
(
±
pg. 44).
38.
• Set the TV to the mode or
channel appropriate for
video playback
(
±
pg. 54, 55).
• Close the cassette holder
cover (
±
pg. 12).
39.
————
40.
•Turn the speaker volume
down (
±
pg. 40).
41.
•Set “S/AV INPUT” to “OFF”
in the Menu Screen
(
±
pg. 41).
42.
•Clean the video heads with
an optional cleaning
cassette (
±
pg. 90).
43.
• Wipe them gently with soft
cloth. Wiping strongly can
cause damage (
±
pg. 80).
TROUBLESHOOTING
(cont.)
JY-VS200U EN 66-95
01.3.12, 7:31 PM
78