JVC JY-VS200U JY-VS200U User Manual -- Pages 66-95 (616KB) - Page 14

the AC Power Adapter - camcorder battery charger

Page 14 highlights

SYMPTOM 44. An unusual mark appears. 45. An error indication (E01 - E06) appears. 46. The charger indicator on the AC Power Adapter/ Charger does not light. 47. Picture does not appear on the LCD monitor. 48. When the image is printed from the printer, a black bar appears at the bottom of the screen. 49. When the camcorder is connected via the DV connector, the camcorder does not operate. 50. During transport, the lens cover opens. 51. The memory card cannot be removed from the camcorder. EN79 POSSIBLE CAUSES 44. ---- 45. •A malfunction of some kind has occurred. In this case the camcorder's functions become unusable. 46. •The temperature of the battery is extremely high/low. •Charging is difficult in places subject to extremely high/ low temperatures. 47. •The viewfinder is pulled out. •The LCD monitor's brightness setting is too dark. 48. •This is not a malfunction. CORRECTIVE ACTION 44. •Check the section of the manual that explains LCD monitor/viewfinder indications (੬ pg. 84 - 88). 45. •Remove the power supply (battery pack, etc.) and wait a few minutes for the indication to clear. When it does, you can resume using the camcorder. If the indication remains even though you repeat the above two or three times, please consult your nearest JVC dealer. 46. •To protect the battery, it is recommended to charge it in places with a temperature of 10°C to 35°C (50°F to 95°F) (੬ pg. 89). 47. •Push the viewfinder back in. •Adjust the brightness of the LCD monitor (੬ pg. 18). •If the monitor is tilted upward 180 degrees, open the monitor fully (੬ pg. 18). 48. •By recording with "DIS" activated (੬ pg. 30) this can be avoided. 49. •The DV cable was plugged/ unplugged with power turned on. 49. •Turn the camcorder's power off and on again, then operate it. 50. ---- 51. ---- 50. •Do not subject the camcorder to shock or excessive vibration during transport. •Turn the camcorder on and off. The lens cover closes. 51. •Push in the memory card a few more times (੬ pg. 13). JY-VS200U EN 66-95 79 01.3.12, 7:31 PM

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30

EN
79
SYMPTOM
POSSIBLE CAUSES
CORRECTIVE ACTION
44.
An unusual mark appears.
45.
An error indication
(E01 — E06) appears.
46.
The charger indicator on
the AC Power Adapter/
Charger does not light.
47.
Picture does not appear on
the LCD monitor.
48.
When the image is printed
from the printer, a black
bar appears at the bottom
of the screen.
49.
When the camcorder is
connected via the DV
connector, the camcorder
does not operate.
50.
During transport, the lens
cover opens.
51.
The memory card cannot
be removed from the
camcorder.
44.
————
45.
• A malfunction of some kind
has occurred. In this case the
camcorder’s functions
become unusable.
46.
• The temperature of the
battery is extremely high/low.
• Charging is difficult in places
subject to extremely high/
low temperatures.
47.
• The viewfinder is pulled out.
•The LCD monitor’s
brightness setting is too dark.
48.
• This is not a malfunction.
49.
• The DV cable was plugged/
unplugged with power
turned on.
50.
————
51.
————
44.
• Check the section of the
manual that explains LCD
monitor/viewfinder
indications (
±
pg. 84 – 88).
45.
• Remove the power supply
(battery pack, etc.) and wait
a few minutes for the
indication to clear. When it
does, you can resume using
the camcorder.
If the indication remains
even though you repeat the
above two or three times,
please consult your nearest
JVC dealer.
46.
•To protect the battery, it is
recommended to charge it
in places with a temperature
of 10
°
C to 35
°
C (50
°
F to
95
°
F) (
±
pg. 89).
47.
• Push the viewfinder back in.
• Adjust the brightness of the
LCD monitor (
±
pg. 18).
• If the monitor is tilted
upward 180 degrees, open
the monitor fully (
±
pg. 18).
48.
• By recording with “DIS”
activated (
±
pg. 30) this
can be avoided.
49.
•Turn the camcorder’s power
off and on again, then
operate it.
50.
• Do not subject the
camcorder to shock or
excessive vibration during
transport.
•Turn the camcorder on and
off. The lens cover closes.
51.
• Push in the memory card a
few more times (
±
pg. 13).
JY-VS200U EN 66-95
01.3.12, 7:31 PM
79