JVC JY-VS200U JY-VS200U User Manual -- Pages 66-95 (616KB) - Page 15

80 EN After Use 1 Turn off the camcorder. 2 Slide and hold OPEN/EJECT in the direction of the arrow, then pull the cassette holder cover open until it locks. The cassette holder opens automatically. Remove the cassette. 3 Press "PUSH HERE" to close the cassette holder . •Once the cassette holder is closed, it recedes automatically. Wait until it recedes completely before closing the cassette holder cover. 4 Slide BATT. RELEASE 1 and remove the battery pack . 2 PUSH HERE Remove. Cassette holder USER MAINTENANCE Cleaning The Camcorder 1 To clean the exterior, wipe gently with a soft cloth. Put the cloth in diluted mild soap and wring it well to wipe off heavy dirt. Then wipe again with a dry cloth. 2 Press PUSH OPEN and open the LCD monitor. Wipe gently with a soft cloth. Be careful not to damage the monitor. Close the LCD monitor. 3 To clean the lens, blow it with a blower brush, then wipe gently with lens cleaning paper. 4 To clean the viewfinder, raise it to the vertical position. Carefully lift the plastic tab on the bottom of the viewfinder, and open the hatch 1. 5 Insert a lens blower or soft cloth into the gap at the bottom of the viewfinder and clean the interior of the viewfinder with it 2. 6 Close the hatch. Tilt the viewfinder back to the horizontal position and push it back in. OPEN/EJECT Switch Cassette holder cover 21 NOTES: ● Avoid using strong cleaning agents such as benzine or alcohol. ● Cleaning should be done only after the battery pack has been removed or other power units have been disconnected. ● Mold may form if the lens is left dirty. ● When using a cleaner or chemically treated cloth refer to the cautions of each product. BATT. RELEASE Switch 1 Hatch 2 Lens blower JY-VS200U EN 66-95 80 01.3.12, 7:31 PM