JVC LT-42WX70 Instructions - Page 57
Cannot turn on the monitor., The remote control does not work., No picture from a connected device. - test
View all JVC LT-42WX70 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
Troubleshooting Cannot turn on the monitor. ● Connect the power cord properly. (➔ page 10) ● Turn on the power switch. (➔ page 10) The remote control does not work. ● Insert the batteries in the correct direction. (➔ page 05) ● Replace the batteries with new ones. ● Aim the remote control to the remote sensor on the monitor. (➔ page 11) ● The effective range of the remote control is about seven meters. ● Get closer to the monitor. ● Remove any obstruction between the remote control and the monitor. No picture from a connected device. ● Select the correct input on the monitor. ● Connect the external device properly. ● Turn on the external device and start playback. No sound. ● Check the speaker cord connection. (➔ page 05) ● Press the MUTE button ( ). ● Check the amplifier connection. ● When "AMP" is selected under "Speaker", the sound is output from the amplifier, and not from the speakers of the monitor. (➔ page 13) No picture from HDMI devices. ● Select the correct input on the monitor. ● Use a cable marked with the HDMI logo. ● Please use a High Speed HDMITM Cable. High Speed HDMITM Cables are tested to carry an HD signal up to 1080p and higher. (➔ page 09) 39