JVC SR-HD1350US Instruction Manual - Page 111
Problem, Symptom, Action, Reference, Change the REMOTE CONTROL CODE
View all JVC SR-HD1350US manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 111 highlights
Others Problem Symptom Action Reference Page The remote control unit The battery of the remote control unit Change new batteries for the remote does not work has run out. control. (A page 19) The remote control code of this unit and the remote control unit are different from each other. Change the "REMOTE CONTROL CODE" (A page 19) for the remote control to the same number used by this unit. A "LOCKED" message appears on the display window of the unit. Disable the "mode lock" setting. (A page 91) The disc cannot be ejected A "LOCKED" message appears on the display window of the unit. Disable the "tray lock" setting. (A page 91) The "READING" message does not disappear from the unit's display window, and the disc tray does not open when the [ M ] button is pressed. Pressing the [ M ] button at the front of the unit for five seconds or longer opens the disc tray. To close the disc tray after removing the disc, press the [ A ] button, and wait until the tray is closed and power is turned off. (If the disc tray does not open after pressing the [ M ] button for five seconds or longer, consult our authorized dealer.) The disc cannot be played A disc that cannot be played on this Confirm that the disc is playable on this unit is inserted. unit. (A page 13) The region code of the BD or DVD is Confirm that the region number is playable (A page 13) different from that of this unit. on this unit. An unfinalized DVD disc that is Use that device to finalize the disc. - recorded using another device is inserted. Output is at "480i" (for The component output setting may Turn the power off, and turn it on again. - NTSC) or "576i" (for be changed to "480i" (for NTSC) or PAL) regardless of the "576i" (for PAL) after viewing at a component output setting of 1080/24p using an HDMI resolution setting connection. The aspect ratios of the HDMI output and component output are different When two monitors are connected respectively to the HDMI output and component output terminals of this unit, the screen aspect ratio of the component output may not be appropriate if "VIDEO PRIORITY MODE" is set to "HDMI". When two monitors are connected simultaneously, users are recommended to set "VIDEO PRIORITY MODE" to "COMPONENT". (A page 88) Mode Conversion cannot be performed although "SEAMLESS" in the "MODE CHANGE" menu is set to "AFTER POWER OFF" and the power is turned off. . Turning off the power may not start mode conversion even if "AFTER POWER OFF" in "SEAMLESS" is set and mode conversion is interrupted by the power being turned on while mode conversion is in progress. Cancel mode conversion. (A page 81) 111