JVC SR-HD1350US Instruction Manual - Page 41
Importing Data from an i.LINK-compatible Device to the HDD, Imports data from the beginning
View all JVC SR-HD1350US manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
.. . Dubbing/Importing Importing Data from an i.LINK-compatible Device to the HDD Data on devices connected to the i.LINK terminal can be imported to the HDD as follows. v Video formats that can be imported: DV and HDV content Memo: v Only titles that are not copyright-protected can be imported. v Devices that have in-built copyright protection such as D-VHS and digital tuners cannot be connected. This unit only allows import from tape media. v Importing will not be performed if no tape has been inserted into the HDV/DV camera. v Importing will be cancelled when the mode is changed from HDV to DV or vice versa. v For camcorders that support both HDV and DV recording, use only one of the modes for recording and playback. v There is no support for editing using a connected PC. v Only one i.LINK device can be connected to this unit at a time. Note: v Turn off the power for this unit and the connecting device when connecting using an i.LINK compatible device. v Do not unplug the i.LINK cable while importing to the HDD is in progress. Doing so may result in loss or damage of the titles. v For example, during full import of HDV content from JVC GY-HD100 via i.LINK connection, the beginning of the image may not be captured if GY-HD100 is not set as follows. (1) Set the [IEEE1394] switch at the rear of the GY-HD100 unit to [HDV] or [DV] according to the recorded content. (2) Set [MENU]/[VIDEO FORMAT]/[PB TAPE] on the GY-HD100 unit to [HDV] or [DV]. (As with (1), set according to the recorded content. Setting to [AUTO] is not allowed.) (3) Check to ensure that the [HDV] or [DV] lamp on the side of the GY-HD100 unit is lit. (Check to ensure that the lamp that is lit corresponds to the setting in (1) and (2).) When importing from a tape that contains data captured in the HDV recording and DV recording modes, change the video camera setting according to each recording mode, check to ensure that the corresponding lamp in (3) is lit, and choose to start import from the current position. m Preparations 1 Connect the device (camera, etc.) to this unit using an i.LINK cable Memo: v After the device (camera, etc.) has been connected using an i.Link cable, turn on the power of the device and switch it to playback mode. (refer to the device's (camera, etc.) instruction manual for more details.) v "HDV/DV RDY" appears on the display window of the unit when an i.LINK device is recognized. 2 Press the [DUBBING] button on the remote control unit v The importing screen appears. &7$$+0) 56'2 5'.'%6+/2146&7$$+0) 61*&& 75$ *&& 5& *&& &+5% *&& *&8&8 *&& 61&8& &+5% &+5%5& 8+&'1 2+%674' &+5%%12; &+5% &+5% %#0%'. ':+6 &7$$+0) 5'.'%6 126+10 14'6740 0':6 3 Select "HDV/DVhHDD" in the importing screen, and press the [OK] button v A check mark is added to the "HDV/DVhHDD" item. 4 Select "NEXT", and press the [OK] button v The import selection screen appears. Imports data from the beginning You can import videos from the beginning till the end as follows. If the current position is halfway through the tape, import after rewinding the tape to the beginning. 1 Select "IMPORT FROM BEGINNING", and press the [OK] button v A check mark is added to the "IMPORT FROM BEGINNING" item. 2 Select "NEXT", and press the [OK] button &7$$+0) 56'2 5'.'%66*'/'6*1&1(+/2146 *&8&8 *&& +/2146(41/$')+00+0) +/2146(41/%744'06215+6+10 HDD REC BD REC REC INPUT MODE SELECT MEDIA SELECT HDD BD/SD ONE TOUCH DUBBING HDV/DV IN %#0%'. ':+6 &7$$+0) $#%- 5'.'%6 126+10 14'6740 0':6 v A recording mode selection screen appears. 3 Select "RECORDING MODE", press the [OK] button, and select from the pop-up menu 41