JVC SR-HD1350US Instruction Manual - Page 22
Connecting External Devices, Connecting the Power Supply, Connecting a wired remote control
View all JVC SR-HD1350US manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
Preparation Connecting External Devices Connecting a wired remote control Connecting using a LAN cable (only for SR-HD1700) .. . . Using a wired connection enables stable control of this unit from an external device. Operation is possible using any code (1 to 4) regardless of the remote control code settings of this unit. Memo: v There is currently no compatible remote control unit available. v To create a wired remote controller, refer to "External Control (only for SR-HD1700)" (A page 92) . Connecting using an RS-232C cable (only for SR-HD1700) External operation is enabled by connecting to a PC or similar device using a LAN cable. For details on external operation, refer to "External Control (only for SR-HD1700)" (A page 92) . Connecting the Power Supply Connect the supplied power cable to this unit as follows. External operation is enabled by connecting an RS-232C cable to a PC or similar device. For details on external operation, refer to "External Control (only for SR-HD1700)" (A page 92) . 1 Connect the supplied power cable to the AC IN terminal of this unit 2 Connect the other end of the power cable to a power point 3 Press the [A] button on the remote control or this unit to switch on the unit. v The power of this unit turns on, and a "HELLO" message appears on the display window. Note: v Do not use power cables other than that supplied with this unit. Doing so may cause this unit to malfunction. 22