JVC SR-V101US Instruction Manual - Page 10
Playback - s vhs
View all JVC SR-V101US manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
Playback Basic Playback Turn on the VCR and TV, and select the VCR channel (or AV mode). A Load a cassette Make sure the window side is up, the rear label side is REW FF 24HR QUICK REC LINK PROGRAM facing you and the arrow on S-VIDEO POWER INSERT A.DUB the front of the cassette is pointing towards the VCR. ● Do not apply too much pressure when inserting. ● The VCR turns on, and the counter on the on-screen display is reset, automatically. ● If the cassette's record safety tab has been removed and "REC SAFETY" is set to "ON" (੬ pg. 19), playback begins automatically. B Start playback Press PLAY (4). ● The S-VHS indicator lights up when you play back a tape recorded in S-VHS mode or in S-VHS ET mode (੬ pg. 13). ● If "VIDEO CALIBRATION" is set to "ON" (੬ pg. 18), "VIDEO CALIBRATION" appears on the screen, and this VCR checks the tape condition during automatic tracking. During playback Stop playback Press STOP (8) on the Remote. OR Press STOP/EJECT (0) on the VCR. Pause playback and view still picture Press PAUSE (9). ● Press PLAY (4) to resume normal playback. NOTE: During still picture, vertical vibration may appear on the TV screen. Press CH+/- on the Remote to get a clearer picture. Pause and Frame-by-Frame playback Press PAUSE (9) to pause, then press SHUTTLE PLUS 2 or 6 (or PAUSE (9)) repeatedly, or turn the JOG dial to the left or right. ● Press PLAY (4) to resume normal playback. Picture Search Press REW (3 ) or FF (5) on the Remote. Press REW (3 ) or FF (5) again to perform high-speed search. ● Each time you press REW (3 ) or FF (5) the search speed changes between low-speed and high-speed. ● Press PLAY (4) to resume normal playback. Variable-Speed Picture Search (including slow-motion) Press SHUTTLE PLUS 2 OR Turn the JOG dial to the left or 6 repeatedly. or right. ● Press PLAY (4) to resume normal playback. ● Each time you press SHUTTLE PLUS 2 or 6 or each time JOG dial passes a click position, the playback speed changes. To decrease the speed during picture search, press the opposite direction button repeatedly or turn the dial in the opposite direction. ● During still picture, press and hold SHUTTLE PLUS 6 to start forward (or SHUTTLE PLUS 2 to start reverse) slow motion playback. When you release the button, still picture resumes. During still picture, holding PAUSE (9) for more than 2 seconds also starts forward slow motion playback. If you press PAUSE (9) again, still picture resumes. NOTE: During slow motion, some noise may appear on the TV screen. Press CH+/- on the Remote to eliminate the noise. rsey Remsv(le1oortswsitoeepn) mSoltoiown (2 steps) PNlaorm pRleave al y search (3 steps) Reverse Fso(5erwastarecprdhs) Reverse Forward Reverse search Reverse play Reverse slow motion Slow motion Normal play Forward search SP -7 -5 -3 -1 -1/6 1/6 1/2 1 1.5 2 3 5 7 EP -21 -11 -5 -1 -1/6 1/6 1/2 1 1.5 2 5 11 21 SEP -21 -11 -7 - - - - 1 - - 7 11 21 ● You can hear the (normal) audio track only during 1.5x PB speed search. ● 1.5x PB speed is only for SP/EP mode. When the tape is not running Rewind/fast-forward Press REW (3 ) or FF (5). OR Turn the JOG dial to the left or right. Eject the cassette Press STOP/EJECT (0). ● You can also eject the cassette when the VCR is turned off. Turn off the VCR Press POWER 1. To prohibit operations during playback (Mode Lock) Press and hold OK on the Remote for more than 5 seconds. " " and " " light up on the front display panel. The playback will not be interrupted until the recording end (unrecorded portion) or tape end is reached. To resume the other operations, press and hold OK on the Remote again for more than 5 seconds. ● When OK is pressed to set Mode Lock, the on-screen display appears and the time counter remains on the TV screen. If the time counter is not necessary, set "ON SCREEN (PLAY)" to "OFF" (੬ pg. 18). - 10 -