JVC SR-V101US Instruction Manual - Page 22

Changing Remote Control Code This Remote is capable of transmitting two control codes; one set to respond to A code control signals and another set to respond to B code control signals. This Remote control is preset to send A code signals because your VCR is initially set to respond to A code signals. You can easily modify your VCR and the Remote to respond to B code signals. When using two JVC VCRs, set two VCRs and their Remotes to different codes, so that you can operate these VCRs separately. A Set remote control code for Remote A Press and hold A/B. B Press the Number key "2". C Press OK, and release A/B. ● The Remote now can transmit B code control signals. (Ex.) To set Remote to B code: MBR SET A/B 2 ENTER/OSD 3 OK Release Hold down Press in succession B Check remote control code for VCR Press and hold 4 on the VCR for more than 5 seconds while the VCR is turned off. The code currently set appears on the display panel. C Change code for VCR Press any key on the Remote. The VCR now responds to B code control signals. ● To set the Remote and the VCR back to A code control signals, repeat the same procedure as shown above except pressing the Number key "1" in step B of 1. To control two VCRs with the same Remote You can control two JVC VCRs by switching the remote control code for the Remote between A and B (੬ step A), keeping two VCRs to different control codes. ● To change only the remote control code for the Remote, DO NOT perform steps B and C. Editing Editing with Another VCR You can use your VCR as the playback or recording VCR. You can use a camcorder as the playback VCR and your VCR as the recording VCR. Refer also to the other components' instruction manuals for connection and its operations. A Make connections Example 1 This VCR To AUDIO/VIDEO IN, S-VIDEO IN To AUDIO/VIDEO OUT, S-VIDEO OUT When using this VCR as the recording VCR, connect this VCR's AUDIO/ VIDEO IN connectors to the audio/video output connectors on another VCR. Audio/Video cable (supplied) When using this VCR as the playback VCR, connect this S-video VCR's AUDIO/ cable VIDEO OUT (supplied) connectors to the audio/ video input connectors on another VCR. To audio/video output, S-Video out To audio/video input, S-Video input Another VCR ● If another VCR is monaural, connect this VCR's AUDIO L IN (or OUT) connector to the audio output (or input) connector on another VCR. Example 2 This VCR (for recording) To AUDIO input To S-VIDEO input Audio/Video cable (supplied) S-video cable (supplied) To audio output To S-video output Player Camcorder - 22 -