JVC THD60 Instructions - Page 10

Getting started Connecting the antennas Connecting a TV XM Mini-Tuner system-TH-D60 only XM Mini-Tuner Home Dock antenna (not supplied) XM Mini-Tuner (not supplied) For better reception, install the XM Mini-Tuner Home Dock antenna in the following location: - Near a south-facing window with aiming the antenna at the sky directly - Where "Channel 1" can be heard clearly - Where the Antenna Aiming display shows a value higher than 0 for either satellite or terrestrial signal strength ( 25) AM and FM antennas Make sure the antenna conductors do not touch any other terminals, connecting cords or power cords. AM loop antenna (supplied) FM antenna (supplied) Turn it until the best reception is obtained. Extend it horizontally. For better FM reception Connect the TV to the appropriate video out jacks to view the playback picture. The picture quality order is as follows: HDMI > Component video > S-video > Composite video Make the following settings after connecting the TV: - Scanning mode ( 14) - MONITOR TYPE ( 23) Connection using the HDMI terminal From HDMI input TV terminal HDMI cable (not supplied) You can make the following settings for the TV when the HDMI connection is used: - HDMI DVI COLOR ( 23) - HDMI OUT ( 23) - HDMI AUDIO OUT ( 24) - DOWN MIX ( 24)* Use a certified HDMI cable, which has the HDMI logo. You can use a monitor with a DVI terminal by connecting with a DVI-HDMI conversion cable. When you play HDCP (High-Bandwidth Digital Content Protection) source, allow a few seconds for the sound and picture to be transmitted to the speakers and TV while the confirmation process is completed. On some TV, no sound may come out during playback of sources such as DVD Audio even when the HDMI AUDIO OUT setting is "ON" ( 24). * This setting is available only when the speaker position mode is set to "S.SPK F" ( 12). FM outdoor antenna (not supplied) Standard type (75 Ω coaxial) connector FM outdoor antenna cord (not supplied) 7