JVC THD60 Instructions - Page 27

Underlined items are the initial settings. Audio menu (AUDIO) DOWN MIX D. RANGE COMPRESSION HDMI AUDIO OUT This menu is available only when the speaker position mode is set to "S.SPK F" ( 12). Select the audio signal output to the TV connected to the HDMI MONITOR OUT terminal. DOLBY SURROUND: For the TV equipped with Dolby Pro Logic decoder STEREO: For ordinary TV You can enjoy powerful audio even at low volume level while playing Dolby Digital software. AUTO: Select this to apply the compression only to the multi-channel software (except 1channel and 2-channel sources). ON: Select this to always apply the compression. This setting is effective only for the source "DVD" or "USB." Select whether the System emits the audio signal from the HDMI MONITOR OUT terminal (ON) or not (OFF). • For selecting whether the external component emits the audio signal through its HDMI terminal, make the setting on the external component. Speaker setting menu (SPK.SETTING) SPK.SETTING menu is available only when the speaker position mode is set to "S.SPK R" ( 12). LEVEL DELAY SUBWOOFER Adjust the output level of each speaker while monitoring the test tone. FRONT LEFT/RIGHT SPEAKER, CENTER SPEAKER, SURROUND RIGHT/LEFT SPEAKER: Select the speaker, then adjust the output level. TEST TONE: Turns on/off the test tone. Adjust the delay time of the speakers. Ex.: FRONT LEFT/RIGHT SPEAKER, CENTER SPEAKER, SURROUND RIGHT/LEFT SPEAKER: Select the Front left 0 ms speaker, then adjust the distance from the listening position to the speakers. • 1 ms increase (or decrease) in delay time corresponds to about 30 cm (1 ft) decrease (or increase) in distance. • Set to 0 ms for the furthest speaker from your position as the basis for the delay time Surround left setting. 2 ms Center 1 ms Subwoofer Front right 0 ms 2.4 m (8 ft) 3.0 m 2.1 m (10 ft) (7 ft) 2.7 m (9 ft) Surround right 2 ms Make the subwoofer setting. LEVEL: Adjust the output level of the subwoofer. CROSS OVER: Select an appropriate crossover frequency according to the size of the cone speaker unit built into the small speaker connected. 120Hz: Select this when the cone speaker unit size is 8 cm (3-3/16 inches) or more. 150Hz: Select this when the cone speaker unit size is between 6 cm (2-3/8 inches) and 8 cm (3-3/16 inches). 200Hz: Select this when the cone speaker unit size is 5 cm (2 inches) or less. Other setting menu (OTHERS) RESUME ON SCREEN GUIDE DivX REGISTRATION Activate (ON) or deactivate (OFF) the resume function. Activate (ON) or deactivate (OFF) the on-screen guide icons. The System has its own Registration Code for DivX playback. You can confirm the code of your System. • Once you play back a disc created by using the Registration Code, the System's code is overwritten by a totally different new one for copyright protection purposes. 24