JVC THD60 Instructions - Page 18

Disc/file playback The following icons show the available disc/file types for the target function: Initial settings Make the following settings before playing back discs/ files. • Scanning mode ( 14) • MONITOR TYPE ( 23) • ON SCREEN LANGUAGE ( 23) Basic playback Playing back a disc 1 Select "DVD" as the source. ( 11) 2 (On the center unit) 3 Place a disc on the tray. Label side up When placing an 8 cm (3-3/16 inches) disc Set the remote control mode before operation. For disc playback 4 Start playback. For playback of a file on a USB mass storage class device Operating the touch sensor panel You can operate the playback control buttons on the center unit simply by touching them. When you touch any one of these buttons, it lights briefly in blue. If a still picture is displayed for about 5 minutes, the System automatically dims the screen (screen saver function). You can deactivate the screen saver function. ( 23) When several types of files (music, picture or movie) are recorded on a disc or device, select the file type you want to play. ( 23) For messages and icons appearing on the display, see "Messages and icons shown on the TV during disc/file playback" ( 31). • JPEG: Slide-show playback starts. • MP3/WMA/WAV: The file control display appears on the TV. ( 22) Playing back a file on a USB mass storage class device 1 Connect a USB mass storage class device while the System is turned off. USB mass storage class device 2 Turn on the System, then select "USB" as the source. ( 11) Playback starts automatically. Press 3 (play button) to start playback if the file is not played back automatically. • JPEG: Slide-show playback starts. • MP3/WMA/WAV: The file control display appears on the TV. ( 22) 15