JVC THD60 Instructions - Page 32

Operating external components Set the remote control mode before operation. For TV For DBS tuner or CATV converter For VCR Operating external components Set the remote control mode before operating each external component (see the left column). Operating the TV TV Turns the power on and off TV VOL +/- Adjusts the volume TV/VIDEO Selects the input mode (either TV or VIDEO) CH +/- Changes the channels 1-10, 0, h10 (100+) Selects the channels TV RETURN Alternates between the previously selected channel and the current channel Preparation Make the audio input setting before operation. ( 14) Operating the DBS tuner or CATV converter VCR/DBS Turns the power on and off CH +/- Changes the channels 1-10, 0, h10 (100+) Selects the channels Setting the manufacturer's code Before operating external components from the remote control, set the manufacturer's code. 1 Set the remote control mode (see above). 2 Press and hold for the target component until the setting is finished. For TV For DBS tuner or CATV converter For VCR «Hold «Hold 3 Operating the VCR VCR/DBS Turns the power on and off 3 (play button) Starts playback 7 Stops playback 8 Pauses playback y Fast-forwards the tape 1 Rewinds the tape REC Press this button together with 3 (play button) to start recording or together with 8 to enter recordingpause. CH +/- Changes the TV channels 0 - 9 Selects the TV channels 4 Enter the manufacturer's code. See "Manufacturer's code list" for the manufacturer's code. ( 30) 5 Release . If there is more than one code listed for the corresponding brand, try each one until you enter the correct one. Set the codes after replacing batteries of the remote control. 29