JVC THD60 Instructions - Page 11
Connecting external components, Connection using the component, video jacks - surround sound
UPC - 046838031052
View all JVC THD60 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
Do not connect the power cord until all other connections have been made. Connection using the component video jacks From component video input TV Green Blue Component video cord (not supplied) Red For the BNC connection, use a plug adapter (not supplied). Connection using the S-video or composite video jack Composite video cord (supplied) TV or Audio connection Connecting a digital component DBS (Direct Broadcasting Digital coaxial cable (not supplied) Satellite) tuner, etc. Digital optical cable (not supplied) A From digital coaxial output B From digital optical output The initial setting for the audio input setting is "COAX." When using OPTICAL terminal, change the setting to "OPT" before playing back. ( 14) Connecting an analog component RCA pin plug cord (not supplied) DVD player, etc. S-video cord (not supplied) A From Composite video input B From S-video input Align the 5 marks. Connecting external components , Connection for "VIDEO1"-TH-D60 Select "VIDEO1" as the source ( 11) for playing a component connected as follows. Video connection DVD player, etc. HDMI cable (not supplied) From HDMI video output No sound signal comes into HDMI VIDEO 1 IN terminal. Make audio connection to listen to the sound (see the right column). A From center channel audio output B From front left/right channel audio outputs C From subwoofer output D From surround left/right channel audio outputs To listen to the sound from AUDIO MULTI IN jacks, perform the following procedure: - Place the speakers by following "Speaker layout A" ( 6). - Select "S.SPK R" as the speaker position mode. ( 12) Select "5.1CH" as the audio input setting before playing back. ( 14) 8