JVC TK-C215VP12U Instructions - Page 29
Check that the [ALARM POSITION], Press the [POSITION SELECT] button.
UPC - 046838027482
View all JVC TK-C215VP12U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
LL PHASE RESET/[SPOT] H B R WHT.BAL. L [MEMORY] LEVEL IRIS TELE NEAR WIDE POSITION SELECT FAR POSITION ZOOM/FOCUS 8 7 6 5 4 4 3 2 2 ALARM 1 ⅷ Registering alarm position For registering the angle of view during monitoring when there is an alarm input. 3. 2.,4. 1.,5. 1. Check that the [ALARM POSITION] indicator light is turned on. Registration of alarm position is enabled. ● Press the [POSITION SELECT] button if the [ALARM POSITION] indicator light is off. 2. Adjust the image size. (A Pg. 28) 3. Press the [MEMORY] button for 2 seconds or longer. The [ALARM POSITION] indicator light blinks for 3 times (green) Ň ALARM position registration is completed 4. Adjust the brightness. (A Pg. 28) 5. Press the [POSITION SELECT] button. The camera returns to the home position Note: ● Be sure to return the camera to the home position after registration of the alarm position is completed. In addition to pressing the [POSITION SELECT] button, you can also use the power ON/OFF button to return the camera to the home position. ● To check images at the registered home position or alarm position, press the [POSITION SELECT] button. Press this button to switch between the image at the home and alarm positions. 29