JVC TK-C215VP12U Instructions - Page 30

Installation and Connection Mounting the inner dome After setting is complete, mount the inner dome to the camera. 1. Mounting the inner dome Mount the inner dome to the 3 clips. Clip(x 3) Inner Dome *TK-C215VP4 is used in the above illustration Mounting the dome cover 1. Cleaning the dome cover Before mounting, remove any dust or dirt from the dome cover. Memo: ● Dirt that is not removed from the cover before mounting may appear on the camera's image. Memo: ● Do not apply excessive force to the dome cover such as stretching it. 2. Mounting the dome cover to the base Mount the dome cover by aligning the 3 position marks on the base with the dome cover. 3. Fastening the dome cover Fasten by tightening the 3 fastening screws of the dome cover using the wrench supplied. Position Alignment Mark (x 3) Note: ● Mount the inner dome such that it does not cover the lens. ● When mounting the inner dome, make sure not to move the position of the lens. Doing so may cause the preset angle of view to go out of alignment. 3 2 Wrench (Supplied) *TK-C215VP4 is used in the above illustration 30