JVC VR-N1600UA Setup Guide - Page 16

Getting Started Part Names and Functions (continued) Rear Panel d U V POWER ON OFF W X YZ a b c U [POWER] switch Switches the power on or off. Memo : ● Be sure to press and hold down the [OPERATE] button on the front panel to shut down the system before switching off the power supply. V [AC IN] power input terminal Connect to an AC outlet using the power cable supplied. W [AUDIO IN 1/AUDIO IN 2] audio input terminals 1/2 (RCA) Connect to the audio output terminal of the device from which audio signals are to be recorded. X [AUDIO OUT] audio output terminal (RCA) Outputs live sound in the live viewing mode. Outputs recorded sound in the playback mode. Memo : ● There is no audio output when playing back still images, when running searches other than x1, or when playing back frame-by-frame. Y [VGA OUT] VGA output terminal Outputs live images, recorded images and the menu screens. Z [LAN1] LAN1 connection terminal (camera network) For connecting to the IP camera (sold separately) network using a LAN cable. Color Status Left Indicator Off Communication at 10 Mbit/ second. Green On Communication at 100 Mbit/ second. Orange On Communication at 1 Gbit/second. Right Off Not connecting to the network. Indicator Yellow Blinking Communication is in progress. 8 a [SERIAL1 to 4] serial terminals 1 to 4 For connecting the communication control terminals on a mouse (sold separately), flash memory (sold separately), UPS (sold separately) or additional disk drive (sold separately). b [LAN2] LAN2 connection terminal (Intranet) For connecting to the remote PC network using a LAN cable. Color Status Left Indicator Off Communication at 10 Mbit/ second. Green On Communication at 100 Mbit/ second. Orange On Communication at 1 Gbit/second. Right Off Not connecting to the network. Indicator Yellow Blinking Communication is in progress. c Connector cover Memo : ● Do not remove the cover. d Signal input/output terminals For operating VR-N1600U/E using external alarm signals or signals received from external devices, or for operating external devices by outputting signals. Memo : ● Diameter of applicable cables: AWG22 to AWG28