JVC VR-N1600UA Setup Guide - Page 24

Basic Operation Viewing Live Images via Front Panel Control This section describes the procedures for viewing live images by using the front panel of VR-N1600U/E. [Live] Screen Displaying the [Live] Screen 1 Press the [LIVE/BROWSE] button when the wallpaper *1 or main menu *2 screen is displayed. ● Press the [LIVE/BROWSE] button when the [Browse] screen is displayed. ● Press the button to toggle between the [Live] and [Browse] screens. Note : ● Do not switch the view frequently within a short time interval. ● When live images do not appear on VN-C625/VN-C655, set the password on the camera unit as well as VR-N1600U/E again. For details on the setting procedures, refer to the [INSTRUCRTIONS] of the camera in use and procedures for setting the root password on the [Edit device settings] screen in this manual. ● The audio setting is set to ANo Audio SourcesB when you return from the setting screen to [Live]. Select the audio parameters again. Select a Camera Select the camera image that you want to view as follows. 1 Press the [SELECT] button ● The [SELECT] indicator lights up. 2 Enter the camera number using the [1] to [16] keypad ● When you have selected a camera, the blue bar at the top of each live image changes to a lighter blue tone. ● Each bar comes with a tri-color square indicator, which indicates the following features, as well as characters that indicate the operating status of the camera. A B C D *1 Wallpaper Screen *2 Main Menu Screen [Live] Screen Select a View For details on the view settings, refer to [INSTRUCRTIONS]. 1 Press the [PTZ/PRESET] button to switch the [PTZ/PRESET] indicator to the blinking mode ● Press the [PTZ/PRESET] button to switch the [PTZ/ PRESET] indicator between the lit and blinking modes. 2 Press the [15/ZOOM IN] and [14/ZOOM OUT] buttons to select a view 16