JVC VR-N1600UA Setup Guide - Page 21
Automatic Registration of Cameras, Selecting a Language
View all JVC VR-N1600UA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
Selecting a Language The [Language Setting] screen appears when you start up VR-N1600U/E for the first time. Select the language to use using the steps below. 2 Check to ensure that the camera is detected ● After the message disappears, a list of detected cameras is displayed. ● If all the cameras are not detected, press the [Auto Detect] button again. If doing so does not solve the problem, check the connection with the cameras and the IP address of the cameras. 1 Select a language ● Use the [2/D] or [10/0/E] button to select a language. 2 Use the [SKIP] button to select [OK], followed by pressing the [16/ENTER] button ● The AThe system is being set up.B message may appear depending on the setting, and the system is automatically rebooted. Memo : ● Selecting [OK] changes the color of the [OK] characters from brown to orange. Automatic Registration of Cameras After you have started up VR-N1600U/E for the first time and finished selecting a language, the [Auto Detect] screen appears. 1 Check to ensure that [Auto Detect] is selected, followed by pressing the [16/ENTER] button ● The APlease wait...B message appears. Memo : ● The characters of the selected item switches to orange color. Memo : ● Devices other than the cameras may appear in the list. Uncheck the boxes of these devices. 3 Swap the order of detected cameras ● Select SORT button using [SKIP] button and pressɹ [16/ENTER] button. The order of detected cameras can be sorted. ● The different types of sort buttons include the [IP], [MAC], [CH], [MAKER], and [MODEL] sort buttons. ● Select list using [SKIP] button to select [2/D], [10/0/E]. After selecting camera, pressɹ[SKIP]] button to select [Up], [Down]. When [16/ENTER] is pressed, the order of cameras will be swapped. ● Deselect the check box of any camera that you are not using. Memo : ● The camera in the upper position of list order has the first priority. Camera number will be registered in the list order. 4 Use the [SKIP] button to select [Entry], followed by pressing the [16/ENTER] button ● The camera that is automatically detected is registered in the system. 13