Kenmore 4101 Use and Care Guide - Page 17
Setting, con't
View all Kenmore 4101 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Setting Oven Controls (con't) Setting Continuous Bake or 12 Hour Energy Saving The TIMER _ and FLEX CLEAN @ pads control the Continuous Bake or 12 Hour Energy Saving features. The oven control has a factory preset built-in 12 Hour Energy Saving feature that will shut off the oven if the oven control is left on for more than 11 hours and 59 minutes. The oven can be programmed to override this feature for Continuous Baking, iNSTRUCTiONS PR ESS DISPLAY To set the control for Continuous Saving features Bake or 12 Hour Energy 1. Press and hold _ for 7 seconds (Figure1). After 7 seconds "12h" or % -h" will appear in the display and the control will beep once. 2. Press @ to switch between the 12 Hour Energy Saving and continuous bake features. Note: "12h" (Figure 2) in the display indicates the control is set for the 12 Hour Energy Saving mode and "- -h" indicates the control is set for the Continuous Bake feature (Figure 3). for 7 seconds @ Figure 1 Figure 2 3. Press :STARTt'o accept the change (Figure 4; display will return to time of day) or press _ to reject the change. Figure 3 Setting Kitchen Timer Figure 4 _,,i The TIMER _ pad controls the Kitchen Timer feature. The Kitchen Timer serves as an extra timer in the kitchen that will beep when the set time has run out. It does not start or stop cooking. The Kitchen Timer feature can be used during any of the other oven control functions. Refer to "Minimum and Maximum Control Pad Settings" for time amount settings. INSTRUCTIONS To set the Kitchen Timer (example for 5 minutes) PRESS DISPLAY 1. Press will appear and "TIMER" will flash in the display (Figure 5). 2. Press the number pads to set the desired time in the display (example (_). Press _ STARTT'Ihe time will begin to count down with "5:00" and (_ _TAR_ Figure 5 "TIMER" will stay in the display (Figure 6). Note: If is not pressed the timer will return to the time of day after 25 seconds. 3. When the set time has run out, "End" and "TIMER" will show in the display (Figure 7). The clock will sound with 3 beeps every 5 seconds until _,_,,_ is pressed. Figure 6 To cancel the Kitchen Timer before the set time has run out Press _. The display will return to the time of day. Figure 7 To Set Add 1 Minute Feature The _ ADD 1 MINUTE pad is used to set the Add 1 Minute feature. When the _ pad is pressed, 1 minute is added to the Kitchen Timer feature if this feature is already active. If the Kitchen Timer feature is not active and the pad is pressed, the Kitchen Timer feature will become active and will begin counting down from 1 minute. 17