Kenmore 4101 Use and Care Guide - Page 19

Consumer Defined Control Features Setting Temperature Display = Fahrenheit or Celsius: The BROIL ,B!o!!;_and FLEX CLEAN pads control the Fahrenheit or Celsius temperature display modes• The oven control can be programmed to display temperatures in Fahrenheit or Celsius• The oven has been preset at the factory to display in Fahrenheit. iNSTRUCTiONS PRESS DISPLAY To change display from Fahrenheit to Celsius or Celsius to Fahrenheit 1 To tell if the display is set for Fahrenheit or Celsius press (B_oii_il. • ,,j (Figure 1) and hold for 7 seconds; "550 °'' will appear and "BROIL" will flash in the display and a beep will sound. If "F" appears, the display is set to show temperatures in Fahrenheit (Figure 2). If "C" appears, the display is set to show temperatures in Celsius (Figure 3). 2. Press @ to switch between Fahrenheit or Celsius display modes. The display will show either "F" (Figure 2) or "C" (Figure 3). 3. Press change. to accept the change or press 0 to reject the for 7seconds @ or Q Figure 1 Figure 2 Figure 3 Setting Oven Controls important Things to Know Before Setting any Basic Oven Cooking Function This appliance has been factory pre-set to start any BAKE, CONV BAKE, CONV ROAST, PREHEAT, CAKE or BREAD function with the oven set temperature automatically set for 350°R However if desired, the oven set temperature may be adjusted at any time during the cooking process.You may also choose to add a COOKTIME or DELAY START with any of the functions listed above. Temperature Visual Display Your oven is equipped with a temperature visual display. When a cooking mode is set, the actual temperature will be shown in the display and will rise as the unit preheat. When the unit has reached its target temperature, a chime will sound to remind you to place the food in the oven. This feature will be active with some cooking modes; bake, convection bake, convection roast, cakes and breads. NOTE: The lowest temperature that can be displayed is IO0°F. 19