Kenmore 4101 Use and Care Guide - Page 20

Setting Oven Controls Setting Preheat The PREHEAT _ pad controls the Preheat feature. The Preheat feature will bring the oven up to temperature and then indicate when to place the food in the oven• Use this feature when recipes call for preheating. Preheating is not necessary when roasting or cooking casseroles. The oven can be programmed to preheat at any temperature between 170°F to 550°F. INSTRUCTIONS PRESS DISPLAY To set the Preheat temperature 1. Arrange the interior oven racks. for 375°F 2. Press @. "350" and "BAKE" will appear in the display (Figure 1). Note that if a preheat of 350°F is needed, press @ Figure 1 3. Press _ _-_ _5_. "375 °" and "BAKE" will appear in the display (Figure 2). 4. Press START"BAKE" will appear in the display• "PRE" and the actual oven temperature shown in the display will alternate as the oven heats and reaches 375°F (Figure 3). Note: After the oven has reached the desired temperature (this example, 375°F) the control will beep and the "PRE" light will turn off and oven target temperature will be displayed (Figure 4). If you missed hearing the beep, you can tell that the oven has reached preheat temperature if you see the oven temperature showing in the oven display. Once the oven has preheated, PLACE FOOD iN THE OVEN. The "BAKE" light will stay on. Press _tO_ when baking is complete or to cancel the preheat feature. To change Preheat temperature while oven is preheating (example: changing from 375°F to 425°F) if it is necessary to change the preheat temperature while the oven is preheating to the original temperature: 1. While preheating, press @. in the display (Figure 5) "375" and "BAKE" will appear 2. Enter the new preheat temperature. Press @ _ @. "425 °'' and "BAKE" will appear in the display (Figure 6). 3. Press "BAKE" will appear in the display• "PRE" and the actual oven temperature shown in the display will alternate as the oven heats and reaches 425°F (Figure 7). Note: A beep will sound once the oven temperature reaches 425°F and the display will show "425 °.' and "BAKE" (Figure 8). 4. When baking is complete press _XO_. Note: While in preheat mode, the convection fan will be activated during the first rise of temperature to allow the oven to reach its target temperature faster. The Bake, Broil and Convection elements will also cycle for a better heat distribution. QQQ @ @ C)OQ @ Figure 2 Figure 3 Figure 4 Figure 5 Figure 6 Figure 7 Figure 8 20