Kenmore 4542 Installation Instructions - Page 2

REFRIGERATOR SAFETY Your safety and the safety of others are very important. We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety messages. This is the safety alert symbol. This symbol alerts you to potential hazards that can kill or hurt you and others. All safety messages will follow the safety alert symbol and either the word "DANGER" or "WARNING." These words mean: You can be killed or seriously injured follow instructions, if you don't immediately You can be killed or seriously injured if you don't follow instructions. All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can happen if the instructions are not followed. INSTALLATION REQUIREMENTS PARTS NEEDED: • IMPORTANT: Your refrigerator dealer has a kit available with a V4" (6.35 mm) saddle-type shutoff valve, a union, and copper tubing. Or you can purchase a 1/4"(6.35 mm) copper tubing with shutoff valve and a V4" (6.35 mm) compression fitting (coupling). Depending on water line connections, you may also need a 1/4" (6.35 mm) nut and 1/4"(6.35 mm) ferrule. Observe all governing codes and ordinances. Installer: Leave Installation Instructions with homeowner. • Homeowner: Keep Installation Instructions for future reference and for the local electrical inspector's use Keep cardboard shipping piece or plywood under refrigerator until it is installed in the operating position. Comply with installation specifications and dimensions. • Remove any moldings or decorative panels from kitchen cabinets that prevent the refrigerator from being serviced. Contact a qualified electrical installer. Top View 3/8" TOOLS NEEDED: Gather the required tools and parts before starting installation. Read and follow the instructions provided with any tools listed here Hand drill or electric drill (properly grounded) V4" nut driver and drill bit Flat-blade screwdriver 5/16"or adjustable wrench 7/_e" and 1_.,,open-end wrenches Two adjustable wrenches Socket wrench 355/8" (65.3 mm) (606om> (66.7 cm) 301/8" (76.4 cm) max. __ullu (36.6 cm) _49.5 cm) I _ 2%" (6.7 cm) max. " X_ A ... A. Dimensions may vary based on the model 2