Kenmore 4542 Installation Instructions - Page 4

Kenmore 4542 - Elite 23.1 cu. Ft. Refrigerator Manual

Get Kenmore 4542 - Elite 23.1 cu. Ft. Refrigerator PDF manuals and user guides View all Kenmore 4542 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 4 highlights

• Minimum fixed wall position is131/4" (34 cm) from thefreezer doorand161/2" (42cm) from therefrigerator door. ,_ ... Explosion Hazard 36" Keep flammable materials and vapors, such as gasoline, away from refrigerator. 161/2.. (42 cm) (91.5 cm) H 131/4" (34 cm) Failure to do so can result in death, explosion, or fire. NOTES: A • The cabinet depth refrigerator can be installed into a recessed opening, at the end of cabinets or as a freestanding refrigerator. If you are installing the refrigerator to fit flush with the front of the base cabinets, all shoe molding and baseboards must be removed from the rear of the refrigerator opening. Location should permit doors to open fully. See the "Door Swing Dimensions" section. Do not install the refrigerator near an oven, radiator, or other heat source, nor in a location where the temperature will fall below 55°F (13°C). Floor must support refrigerator weight (more than 600 Ibs [272 kg], door panels and contents). • • • Model Size 23' (654 L) 25' (694 L) Height A Standard Cabinet 69" (175.3 cm) 72" (182.9 cm) • Door Swing Dimensions Location must permit doors to open to a minimum of 150 °, Allow 13V4" (34 cm) minimum space between the side wall and the freezer side of the refrigerator. Allow 161/2 '' (42 cm) minimum space between the side wall and the refrigerator side. NOTE: Dimensions may vary based on model. Electrical Shock Hazard 41_4" (106 cm) 451/2" 115.6 cm] Plug into a grounded 3 prong outlet. Do not remove ground prong. Do not use an adapter. Do not use an extension cord. Failure to follow these instructions fire, or electrical shock. can result in death, Before you move your refrigerator into its final location, it is important to make sure you have the proper electrical connection. Recommended grounding method A 115 Volt, 60 Hz., AC only 15- or 20-amp fused, grounded electrical supply is required. It is recommended that a separate circuit serving only your refrigerator be provided. Use an outlet that cannot be turned off by a switch. Do not use an extension cord. 4

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
•
Minimum
fixedwallposition
is131/4"
(34cm)fromthefreezer
doorand161/2"
(42cm)fromtherefrigerator
door.
,_
.....
H
131/4"
(34
cm)
36"
(91.5
cm)
161/2..
(42
cm)
A
Model
Size
23'
(654
L)
25' (694 L)
Height A
Standard
Cabinet
69"
(175.3 cm)
72"
(182.9 cm)
Door
Swing
Dimensions
Location
must permit
doors to open to a minimum
of 150 °, Allow
13V4" (34 cm) minimum
space
between
the side wall and the
freezer side of the refrigerator.
Allow
161/2
'' (42 cm) minimum
space
between
the side wall
and the refrigerator
side.
NOTE:
Dimensions
may vary based
on model.
41_4"
451/2"
(106
cm)
115.6
cm]
Explosion
Hazard
Keep
flammable
materials
and vapors,
such as
gasoline,
away from
refrigerator.
Failure to do so can result
in death,
explosion,
or fire.
NOTES:
•
The cabinet
depth
refrigerator
can be installed
into a
recessed
opening,
at the end of cabinets
or as a freestanding
refrigerator.
•
If you are installing
the refrigerator
to fit flush with the front of
the base cabinets,
all shoe molding
and baseboards
must
be
removed
from the rear of the refrigerator
opening.
•
Location
should
permit
doors
to open fully. See the "Door
Swing
Dimensions"
section.
•
Do not install the refrigerator
near an oven, radiator,
or other
heat source,
nor in a location
where
the temperature
will fall
below 55°F (13°C).
•
Floor must support
refrigerator
weight
(more than
600 Ibs
[272 kg], door
panels and contents).
Electrical
Shock
Hazard
Plug into a grounded
3 prong
outlet.
Do
not
remove
ground
prong.
Do
not
use an adapter.
Do
not
use an extension
cord.
Failure
to follow
these instructions
can result
in death,
fire, or electrical
shock.
Before you move
your refrigerator
into its final location,
it is
important
to make sure you have the proper
electrical
connection.
Recommended
grounding
method
A 115 Volt, 60 Hz., AC only
15- or 20-amp
fused,
grounded
electrical
supply
is required.
It is recommended
that a separate
circuit
serving
only your
refrigerator
be provided.
Use an outlet
that cannot
be turned
off by a switch.
Do not use an
extension
cord.
4