Kenwood DDX5706S Operation Manual - Page 71
Controlling Audio, 3-way speaker system setup (DDXDMX706S906S/ 71), way speaker system setup
View all Kenwood DDX5706S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 71 highlights
Controlling Audio You can adjust various settings such as audio balance or subwoofer level. 1 Press the [ ]/[MENU] button. hhPopup menu appears. 2 Touch [Audio]. Controlling Audio 3 Touch [STANDBY]. 4 Press the button 1 followed by the button 2 for 1 second at the same time. DDX6906S 2 1 See the following section for each setting. • Set up speaker / X'over (P.72) • Controlling equalizer/ subwoofer level (P.74) • Set listening position / DTA (P.77) • Controlling general audio (Fader / Balance) (P.73) • Set volume offset (P.75) • Performing zone control (P.75) • Set sound effect (P.76) • Memory/recall the audio settings (P.78) 3-way speaker system setup (DDX6906S/ DMX706S) Select the appropriate crossover network mode for the speaker system used (2-way or 3-way speaker system). 1 Press the [ ]/[HOME] button. hhHOME screen appears. 2 Touch [ ]. hhSource selection screen appears. DMX706S 1 2 hhSpeaker system select screen appears. 5 Select the crossover network mode. hhA confirmation screen appears. 6 Touch [Yes]. NOTE • When the 3-way speaker system is selected, the following functions are disabled. --Front focus of Listening Position / DTA --Fader for Controlling General Audio --Zone Control --Selection of the speakers to output sound from the cell-phone of Bluetooth HF/Audio --Beep for User Interface Setup • Connecting 3-way speakers with the 2-way mode selected can break the speakers. English 71