Kenwood DDX5706S Operation Manual - Page 83
Supplied accessories for, installation, Installation procedure, DDX6906S/ DDX6706S/ DDX5706S
View all Kenwood DDX5706S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 83 highlights
• This unit has the cooling fan to decrease the internal temperature. Do not mount the unit in a place where the cooling fan of the unit is blocked. Blocking these openings will inhibit the cooling of the internal temperature and result in malfunction. (DDX6906S/ DDX6706S/ DDX5706S) Connection/Installation ÑÑSupplied accessories for installation 1 x1 2 (3 m) x1 3 Cooling fan (DMX706S/ DMX7706S) Cooling fan • Do not press hard on the panel surface when installing the unit to the vehicle. Otherwise scars, damage, or failure may result. • Reception may drop if there are metal objects near the Bluetooth antenna. Bluetooth antenna unit x2 4 (M5 x 8 mm) x6 5 (M5 x 8 mm) x6 6 x1 7 [1] (2 m) x1 [1] DMX706S/ DMX7706S only ÑÑInstallation procedure 1) To prevent a short circuit, remove the key from the ignition and disconnect the ¤ terminal of the battery. 2) Make the proper input and output wire connections for each unit. 3) Connect the speaker wires of the wiring harness. 4) Connect the wiring harness wires in the following order; ground, battery, ignition. 5) Connect the wiring harness connector to the unit. 6) Install the unit in your car. 7) Reconnect the ¤ terminal of the battery. English 83