Kenwood DDX5706S Operation Manual - Page 74
Equalizer Control, Recall the EQ curve
View all Kenwood DDX5706S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 74 highlights
Controlling Audio 4 Set each parameter as follows. ■■[Fader / Balance] Adjust the volume balance around the touched area. [C] and [D] adjust the right and left volume balance. [R] and [S] adjust the front and rear volume balance. ■■ [Center] Clear the adjustment. Equalizer Control You can adjust equalizer by selecting the optimized setting for each category. 1 Press the [ ]/[MENU] button. hhPopup menu appears. 2 Touch [Audio]. hhAudio screen appears. 3 Touch [EQ / SW Level]. You can select a frequency bar and adjust its level by [R], [S]. ■■[Preset Select] Display the screen for selecting the preset equalizer curve. (P.74) ■■ [Memory] Saves the adjusted equalizer curve as "User1" to "User4". (P.74) ■■ [Initialize] Initialize (flatten) the current EQ curve. ■■[ALL SRC] Apply the adjusted equalizer curve to all sources. Touch [ALL SRC] and then touch [OK] on the confirmation screen. ■■[Bass EXT] (Bass Extend Settings) When turned on, the frequencies lower than 62.5 Hz is set to the same gain level (62.5 Hz). ■■[SW Level] Adjust the subwoofer volume. This setting is not available when Subwoofer is set to "None". See Speaker / X'over setup (P.72). ÑÑRecall the EQ curve 1 Touch [Preset Select]. 2 Select an EQ curve. 4 Touch the screen and set the Graphic Equalizer as desired. ■■Gain level (area in dotted frame) Adjust the gain level by touching each frequency bar. 74 NOTE • [iPod] is available only for the iPod source. ÑÑSave the EQ curve 1 Adjust the EQ curve. 2 Touch [Memory].