Kenwood DPX-M3200BT Instruction Manual - Page 25
Display Settings
View all Kenwood DPX-M3200BT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
Audio Settings When 3-way crossover is selected: [TWEETER LEFT]/[TWEETER RIGHT]/[MID LEFT]/[MID RIGHT]/[WOOFER] - You can only select [WOOFER] if a setting other than [NONE] is selected for [WOOFER] of [SPEAKER SIZE]. (Page 23) • [R-SP LOCATION] of [CAR SETTINGS] is selectable only if: - 2-way crossover is selected. (Page 7) - A setting other than [NONE] is selected for [REAR] of [SPEAKER SIZE]. (Page 23) Display Settings Zone identification for color settings and brightness settings Determining the delay time automatically If you specify the distance from the currently set listening position to every speaker, the delay time will be automatically calculated. 1 Set [POSITION] and determine the listening position as the reference point (the reference point for [FRONT ALL] will be the center between the right and left in the front seats). 2 Measure the distances from the reference point to the speakers. 3 Calculate the distance between the furthest speaker (subwoofer on the illustration) and other speakers. 4 Sets the [DISTANCE] calculated in step 3 for individual speakers. 5 Adjusts [GAIN] for individual speakers. Example: When [FRONT ALL] is selected as the listening position. Set the dimmer Press and hold DISP to turn on or off the dimmer. • Once you press and hold this button, [DIMMER] (page 26) setting will be overwritten. Change the display settings 1 Press the volume knob to enter [FUNCTION]. 2 Turn the volume knob to select an item (page 26), then press the knob. 3 Repeat step 2 until the desired item is selected/activated or follow the instructions stated on the selected item. 4 Press and hold to exit. To return to the previous setting item, press . ENGLISH 25