Kenwood DPX-M3200BT Instruction Manual - Page 31
References
View all Kenwood DPX-M3200BT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
Installation/Connection Connect external components References Maintenance Cleaning the unit Wipe off dirt on the faceplate with a dry silicone or soft cloth. No Part 1 Learning steering remote control (Page 27) 2 Output terminals (See the following "Connect external amplifiers via output terminals".) 3 Microphone input jack (Page 15) Connect external amplifiers via output terminals When connecting an external amplifier to the output terminals of this unit, securely connect the amplifier ground wire to the car chassis to prevent damage to the unit. More information For: - Latest firmware updates and latest compatible item list - KENWOOD original application - Any other latest information Visit . Playable files • For USB mass storage class device: MP3 (.mp3), WMA (.wma), AAC (.aac), AAC (.m4a), WAV (.wav), FLAC (.flac) • Playable USB device file system: FAT12, FAT16, FAT32 Even when audio files comply with the standards listed above, playback may be impossible depending on the types or conditions of media or devices. • For detailed information and notes about the playable audio files, visit . About USB devices • You cannot connect a USB device via a USB hub. • Connecting a cable whose total length is longer than 5 m may result in abnormal playback. • This unit cannot recognize a USB device whose rating is other than 5 V and exceeds 1.5 A. Output terminals FRONT: REAR/SW: 2-way crossover Front output Rear/subwoofer output 3-way crossover Mid Range output Woofer output ENGLISH 31