Kenwood DRV-A700W Operation Manual - Page 23

Basic Operation -Video Menu Access the VIDEO MENU(Video Setting on the app) through the smartphone. About detailed explanation of smartphone app operation, refer to "Using the smartphone app" (P34 to P42). • Resolution: Choose the video resolution. OPTIONS: 1080P 30fps Dual / 1440P 30fps (default) / 1080P 30fps • Video Length: Set the length for each individual video clip. The video recorded by the device will be split and stored as individual video clips. The loop recording function will automatically overwrite the oldest and non-protected video clip when the memory card is full. OPTIONS: 1 Minute (default)/3 Minutes/5 Minutes • Exposure: Adjust exposure levels settings. OPTIONS: +2/+1/0(default)/-1/-2 • Parking Mode Sensor: Parking mode function will be available after turning on the parking mode sensor and connecting the hardwire kit to the permanent power. OPTION: On/Off (default) If the device does not detect any vibration more than 5 minutes, it will turn off the device itself automatically and enter the parking mode. Once the device detects any vibration in the parking mode, it will turn on the device automatically and record the video for 30 seconds. In this duration, if the device detects any other vibration, it will extend recording for 30 seconds until there is no vibration at all and turn off the device back to the parking mode. If the device detects the constant vibration more than 15 seconds, it will assume that the driver is driving the car and automatically switch from Parking Mode to Normal Mode. • G Sensor: G sensor is the sensor that can detect forces. When it senses any forces, it will protect the current file automatically. Adjust the sensitivity of G sensor here. OPTIONS: High/Medium (default)/Low/Off • GPS: Turn the GPS function ON or OFF. OPTIONS: On (default)/Off • Speed Units: Adjust the unit for speed data. OPTIONS: MPH (default)/KMH 20