Kenwood DVT-6300-H Instruction Manual - Page 36

36 Program play You can listen to the desired tracks of the current CD or VCD in any desired order. Program Edit 1 Insert a disc and close the tray. 0 DVR-6300 (EN/K,P,E,X) Operations 2 Press P.MODE key to enter the Program edit mode. Program edit screen appears. Lit Program E 3 Select specific track by press Cursor up/down (5/∞) keys. 4 Press ENTRE key to register selected value onto Program list. 5 You can select maximum 30 values by repeating step 3 - 4. 6 Press Cursor right (3) key. Example of CD playback CD TRACK 1 TRACK 2 TRACK 3 TRACK 4 TRACK 5 TRACK 6 TRACK 7 TRACK 8 0: 56: 18 Program E TRACK 12 TRACK 8 TRACK 10 TRACK 3 STER. Clear All BYPASS Track list Program list The programmed track you selected last is highlighted on the program list. 7 Select the track you want to start playing on the Program list. ÷ Press TOP MENU to move to the next page. ÷ Press MENU to move to the previous page. 8 Press PLAY key to start. Playback begins in the order in which you programmed tracks. Playback stops after all of the tracks on the Program list have played once. ÷ MP3/WMA program playback q ÷ The unit stops when the STOP (7) key is pressed. To restart program play, press the PLAY key. ÷ Press P.MODE key to exit the Program edit mode. P.B.C. on mode of VCD, the Program play function Note does not work. * To repeat program play During program playback, press the REPEAT key on the remote. Each press the key switches the mode. 1 "TRACK" : repeats the current track. 2 "ALL" : repeats all the tracks on programmed list. 3 "OFF" : repeat off If you press SKIP (¢) once during Repeat Track Note playback, the repeat playback cancels.