Kenwood KVT-M707 Instruction Manual - Page 63

Before Use Audio Control You can adjust the front/ rear and right/ left audio balance. Displaying the Audio Control 1 screen Audio Control 1 screen 1 6 4 3 5 2 6 7 -1 5 8 79 1 1 8 10 1 1 Adjusts the volume. 2 Returns to the Control screen of the previous source. 3 Calls the Setup Menu. (see page 46) 4 Calls the Sound Effects Menu. 5 Adjusts the right and left volume balance. 6 Adjusts the front and rear volume balance. 7 Adjusts the volume of the present source based on the difference level of original volume. • If you have increased the volume first, then reduced the volume using the "Vol. Offset", the sound generated if you suddenly switch to another source may be extremely loud. 8 Adjusts the subwoofer volume. 9 Turns the Loudness control function On or Off. If turned "On", high and low tones are automatically enhanced during low volume. ( On) p Displays the Audio Control 2 screen. Displaying the Audio Control 2 screen q Adjusts the bass boost of the B.M.S power amplifier (optional accessory). Audio Control 2 screen Me nu BMS AMP Bass 11 Flat BMS AMP FREQ 12 Normal 11 Low 12 • You may not set some models of power amp boost to "+18". See the catalog or instruction manual of power amplifier. w Sets the center frequency of bass boost you have set for "AMP Bass". If you set the center frequency to "Low", it will be dropped approximately 20% to 30%. e Displays the Audio Control 1 screen. 13 Audio Control 2 English | 63