Kenwood KVT-M707 Instruction Manual - Page 66
Zone Control, Displaying the Zone Control screen
View all Kenwood KVT-M707 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
Zone Control You can set the front and rear audio source. Sound Effects Menu Displaying the Zone Control screen Zone Control screen 1 4 7 3 2 Normal 6 1 1 5 8 6 AV-IN1 1 1 Adjusts the volume. 2 Returns to the Control screen of the previous source. 3 Calls the Setup Menu. (see page 46) 4 Calls the Sound Effects Menu. 5 Turns the Zone Function (that sets different source sounds for front and rear speakers) On or Off. 6 Sets the front and rear audio source separately. (This button appears when the Zone function is On.) • When the rear speaker sound is switched, the audio source that is output at the AV OUTPUT terminal is also switched to the same source. However, if you have set the "Area" to "Reverse", the audio source that is output at the AV OUTPUT terminal is switched depending on the front sound source. 7 Switches the front and rear audio sources. (This button appears when the Zone function is On.) Use "Reverse" to change over the front and rear audio sources. 8 Adjusts the volume of the rear channel. (This button appears when the Zone function is On.) • There are following limitations when zone function is set to "On". - There is no output from the subwoofer. - Equalizer (see page 64) and Loudness (see page 63) are not effective for the rear channel (or front channel when "Area" is set to "Reverse") . - Audio Setup function (see page 47) and Equalizer setting function (see page 64) are not available. 66 | English