Kenwood VR-510 User Manual - Page 51

Specifications, AUDIO DIGITAL AUDIO FM tuner GENERAL

Page 51 highlights

Specifications AUDIO section Rated power output during STEREO operation 110 watts per channel minimum RMS, both channels driven, at 8 Ω from 20 Hz to 20 kHz with no more than 0.7% total harmonic distortion. (FTC) Effective power output during SURROUND operation FRONT (20-20kHz, 0.7% T.H.D. at 8 Ω one channel driven 110 W + 110 W CENTER (20-20kHz, 0.7% T.H.D. at 8 Ω one channel driven 110 W SURROUND (20-20kHz, 0.7% T.H.D. at 8 Ω one channel driven 110 W + 110 W Total harmonic distortion 0.045% (1 kHz, 55W, 8 Ω) Frequency response CD 10 Hz ~ 60 kHz, +0 dB, -3.0 dB Signal to noise ratio (IHF'66) PHONO (MM 75 dB CD 92 dB Input sensitivity / impedance PHONO (MM 4 mV / 27 kΩ CD 300 mV / 47 kΩ MONITOR IN 300 mV / 47 kΩ DVD/6CH INPUT 300 mV / 47 kΩ Output level / impedance TAPE REC 300 mV / 1 kΩ MONITOR OUT 300 mV / 1 kΩ PRE OUT (FRONT, CENTER, SURROUND 1 V / 500 Ω PRE OUT (SUBWOOFER 1.8 V / 500 Ω Tone control BASS 10 dB (at 70 Hz) TREBLE 10 dB (at 10 kHz) DIGITAL AUDIO section Sampling frequency 32 kHz, 44.1 kHz, 48 kHz, 96kHz Input level / impedance / wave length Optical 15 dBm ~ -21 dBm), 660 nm ±30nm Coaxial 0.5 Vp-p / 75 Ω Caution : Read this page carefully to ensure safe operation. VIDEO section 51 VIDEO inputs / outputs VIDEO (composite 1 Vp-p / 75 Ω S VIDEO (luminance signal 1 Vp-p / 75 Ω (chrominance signal 0.286 Vp-p / 75 Ω COMPONENT VIDEO (luminance signal 1 Vp-p / 75 Ω (CB/CR - signal 0.324 Vp-p / 75 Ω FM tuner section Tuning frequency range 87.5 MHz ~ 108 MHz Usable sensitivity (MONO) 1.3 µV (75 Ω)/ 13.2 dBf (75 kHz DEV., SINAD 30 dB) 50dB quieting sensitivity STEREO 28 µV (75 Ω)/ 40.2 dBf Total harmonic distortion (1 kHz) MONO 0.5% (65 dBf input) STEREO 0.7% (65 dBf input) Signal to noise ratio (1 kHz, 75 kHz DEV.) MONO 75 dB (65 dBf input) STEREO 68 dB (65 dBf input) Stereo separation (1 kHz 40 dB Selectivity (±400 kHz 70 dB Frequency response 30 Hz ~ 15kHz), +0.5 dB, -3.0 dB AM tuner section Tuning frequency range 10 kHz step 530 kHz ~ 1,700 kHz Usable sensitivity 16 µV / (600 µV/m) Signal to noise ratio (30% mod. 1 mV input 50 dB GENERAL Power consumption 2.6 A AC outlet SWITCHED total 150 W, 1.25 A max.) Dimensions W : 440 mm (17-5/16") H : 144 mm (5-11/16") D : 399 mm(15-11/16") Weight (Net 8.75 kg (19.3 lb) Additional Information Notes 1. KENWOOD follows a policy of continuous advancements in development. For this reason specifications may be changed without notice. 2. The full performance may not be exhibited in an extremely cold location (under a water-freezing temperature).

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52

51
Additional Information
Notes
1. KENWOOD follows a policy of continuous advancements in development.
For this reason specifications may be changed without notice.
2. The full performance may not be exhibited in an extremely cold location (under a water-freezing temperature).
AUDIO section
Rated power output during STEREO operation
110 watts per channel minimum RMS, both channels driven, at
8
from 20 Hz to 20 kHz with no more than 0.7% total harmonic
distortion. (FTC)
Effective power output during SURROUND operation
FRONT (20-20kHz, 0.7% T.H.D. at 8
one channel driven)
..............................................................................
110 W + 110 W
CENTER (20-20kHz, 0.7% T.H.D. at 8
one channel driven)
.............................................................................................
110 W
SURROUND (20-20kHz, 0.7% T.H.D. at 8
one channel
driven)
..................................................................
110 W + 110 W
Total harmonic distortion
.........................
0.045% (1 kHz, 55W, 8
)
Frequency response
CD
.............................................
10 Hz ~ 60 kHz, +0 dB,
3.0 dB
Signal to noise ratio (IHF
66)
PHONO (MM)
........................................................................
75 dB
CD
.........................................................................................
92 dB
Input sensitivity / impedance
PHONO (MM)
............................................................
4 mV / 27 k
CD
.........................................................................
300 mV / 47 k
MONITOR IN
........................................................
300 mV / 47 k
DVD/6CH INPUT
..................................................
300 mV / 47 k
Output level / impedance
TAPE REC
..............................................................
300 mV / 1 k
MONITOR OUT
......................................................
300 mV / 1 k
PRE OUT (FRONT, CENTER, SURROUND)
.............
1 V / 500
PRE OUT (SUBWOOFER)
.......................................
1.8 V / 500
Tone control
BASS
................................................................
±10 dB (at 70 Hz)
TREBLE
..........................................................
±10 dB (at 10 kHz)
DIGITAL AUDIO section
Sampling frequency
......................
32 kHz, 44.1 kHz, 48 kHz, 96kHz
Input level / impedance / wave length
Optical
...........................
(
15 dBm ~
21 dBm), 660 nm ±30nm
Coaxial
.................................................................
0.5 Vp-p / 75
VIDEO section
VIDEO inputs / outputs
VIDEO
(composite)
............................................
1 Vp-p / 75
S VIDEO
(luminance signal)
................................
1 Vp-p / 75
(chrominance signal)
.....................
0.286 Vp-p / 75
COMPONENT VIDEO (luminance signal)
.............
1 Vp-p / 75
(
C
B
/C
R
- signal)
.......
+/
0.324 Vp-p / 75
FM tuner section
Tuning frequency range
...................................
87.5 MHz ~ 108 MHz
Usable sensitivity (MONO)
................
1.3 μV (75
)/ 13.2 dBf (75 kHz DEV., SINAD 30 dB)
50dB quieting sensitivity
STEREO
...................................................
28 μV (75
)/ 40.2 dBf
Total harmonic distortion (1 kHz)
MONO
............................................................
0.5% (65 dBf input)
STEREO
........................................................
0.7% (65 dBf input)
Signal to noise ratio (1 kHz, 75 kHz DEV.)
MONO
..........................................................
75 dB (65 dBf input)
STEREO
......................................................
68 dB (65 dBf input)
Stereo separation (1 kHz)
..........................................................
40 dB
Selectivity (±400 kHz)
.................................................................
70 dB
Frequency response
.................
(30 Hz ~ 15kHz), +0.5 dB,
3.0 dB
AM tuner section
Tuning frequency range
10 kHz step
.................................................
530 kHz ~ 1,700 kHz
Usable sensitivity
.................................................
16 μV / (600 μV/m)
Signal to noise ratio (30% mod. 1 mV input)
...........................
50 dB
GENERAL
Power consumption
....................................................................
2.6 A
AC outlet
SWITCHED
.......................................
(total 150 W, 1.25 A max.)
Dimensions
.....................................................
W : 440 mm (17-5/16")
H : 144 mm (5-11/16")
D : 399 mm(15-11/16")
Weight (Net)
..............................................................
8.75 kg (19.3 lb)
Specifications
Caution : Read this page carefully to ensure safe
operation.