KitchenAid KFRS271TSS Use and Care Guide - Page 14

5. Place warming shelf on brackets as shown. B A A A. Warming shelf brackets B. Warming shelf 6. Attach condiment shelf to the inside of the left cabinet door. LP Gas: IMPORTANT: A 20 lb LP gas fuel tank must be purchased separately. IMPORTANT: The gas pressure regulator/hose assembly supplied with the grill must be used. Replacement gas pressure regulator/hose assembly specific to your model, is available from your outdoor grill dealer. To Install the 20 lb LP Gas Fuel Tank: 1. Open cabinet doors. 2. Press the locking tab on the tank tray and pull out the tray. A A. Tank tray locking tab 3. Place the 20 lb LP gas fuel tank bottom collar into the mounting hole in the tank tray. A 4. Tighten the locking screw against the bottom collar of the 20 lb LP gas fuel tank to secure. B A. Attachment holes B. Condiment shelf 7. Dispose of/recycle all packaging material. Make Gas Connection WARNING A B C A. Locking screw B. Mounting hole C. Bottom collar 5. Screw the gas pressure regulator/hose assembly to the 20 lb LP gas fuel tank as shown. B Explosion Hazard Securely tighten all gas connections. If connected to LP, have a qualified person make sure gas pressure does not exceed 11" (28 cm) water column. Examples of a qualified person include: licensed heating personnel, authorized gas company personnel, and authorized service personnel. Failure to do so can result in death, explosion, or fire. If converting to Natural gas, see conversion kit requirements in the "Gas Supply Requirements" section. Follow instructions included with kit. A A. 20 lb LP gas fuel tank B. Gas pressure regulator/hose assembly 6. Turn on the gas supply. Wait a few minutes for gas to move through the gas line. 7. Test all connections by brushing on an approved noncorrosive leak-detection solution. Bubbles will show a leak. Correct any leak found. 8. Slide tank tray back into the cabinet and lock into place. 14