KitchenAid KFRS271TSS Use and Care Guide - Page 7
Cabinet Cutout Dimensions - natural gas
UPC - 883049057569
View all KitchenAid KFRS271TSS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
Cabinet Cutout Dimensions (Built-In Outdoor Grills) The installation of this grill must conform with local codes or, in the absence of local codes, with either the National Fuel Gas Code, ANSI Z223.1/NPFA 54, Natural Gas and Propane Installation Code, CSA B149.1, or Propane Storage and Handling Code, B149.2. Copies of the standards listed may be obtained from: CSA International 8501 East Pleasant Valley Rd. Cleveland, Ohio 44131-5575 NOTE: The grill drops into the opening and the bottom of the grill should be supported by the bottom support of the cabinet cutout. The dimension chart and illustration below include cutout dimensions and minimum spacing requirements for all built-in outdoor products. The illustration is for reference. The design of your cabinet layout can be personalized, but the dimensions for the cutouts and minimum spacing must be followed. 3" to o(7p.e6ncmho)omdin. C C E 1to2"an(3y0a.5cccems)smoriyn. E K (239.2¹⁄₈c"m) K (12.7 c5m" ) min. WDraarwmeirng J B Side SBoeurarnr ers D GReriflrlsesohrment Centers Access Doors Utility oTDrrraaswher 20⁷⁄₈" (53.0 cm) L 2¹⁄₂" (6.4 cm) min. K K F M 1tao2c"caenmsyisno.ry D (3.8 c1m¹⁄₂") min. 20⁵⁄₈" (52.4 cm) Refrigerator oIcre Maker K G HA Minimum Spacing Requirement Between Cutouts - Dimension K Between 2 or more sets of Access Doors adjacent to each other: K = 14" (35.6 cm) when 2 adjacent doors are opened to 90 degrees K = 8" (20.3 cm) when 1 of the adjacent doors is opened to 90 degrees Between a set of Access Doors and a Trash Drawer, Utility Drawer, Warming Drawer, Refrigerator, or Ice Maker: K = 8" (20.3 cm) when 1 of the adjacent doors is opened to 90 degrees Between a Trash Drawer, Utility Drawer, or Warming Drawer: K = 3" (7.6 cm) 7