Kodak 8847121 User Guide - Page 35

Making camera selections When you use the Kodak Scan Validation Tool, you will need to select which camera(s) you want to use to scan your document to get the desired results. You can use the following examples as a guide when making camera selections. When you launch the Kodak Scan Validation Tool, you will be making selections on the dialog boxes to set up your images for scanning test documents. Both TWAIN and ISIS have camera selection boxes that refer to the cameras within the scanners. Following are some examples of choosing the correct camera for the desired results. For the purpose of these examples, the TWAIN Datasource has been used. Example 1: scanning a two-sided color document both sides in color If you want to scan a two-sided color document, make your camera selections as follows: Camera selection Result - Side 1 Result - Side 2 • Select both Front Color and Rear Color. Depending on which camera (in this example, Front Color) is highlighted, will depend on which side of the document is scanned first. The result is two images in color. Example 2: scanning a two-sided color document, front side only in bi-tonal If you want to scan only the front side of a color document in black-andwhite, make your camera selections as follows: A-61527 May 2006 Camera selection Original - Side 1 Result - Side 1 • Select and highlight Front Bitonal. The resultant image will be the front side of the document in black-and-white. 31