Kodak 8847121 User Guide - Page 74
Cleaning the imaging area, Cleaning the platen glass
View all Kodak 8847121 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 74 highlights
Cleaning the imaging area 1. Remove dust and debris from this area by using a Staticide wipe or a small brush. Be careful not to scratch the glass when cleaning. Use caution when cleaning the upper and lower white background strips. Be careful not to catch the small black tabs with the Staticide wipe. These tabs are fragile and can bend or break. IMPORTANT: Staticide wipes contain isopropanol which can cause eye irritation and dry skin. Wash your hands with soap and water after performing maintenance procedures. Refer to MSDS for more information. 2. Wipe the imaging area again with an almost-dry Staticide wipe to remove any streaks. 3. When finished, close the ADF cover. Cleaning the platen glass To clean the smudges and fingerprints on the platen glass: 1. Open the flatbed cover. 2. Wipe the flatbed platen glass with a fresh Staticide wipe. 3. Wipe the flatbed platen glass with a dry Staticide wipe. 70 A-61527 May 2006