Kodak 8847121 User Guide - Page 54

The Options tab The Options tab allows you to set Image Transfer and Transport control. Image Transfer Order  if you are using simultaneous output scanning (bi-tonal and color/grayscale) for either side, this option controls the order in which the scanner returns image data. For example, if you are scanning color and bi-tonal and you select Bi-tonal Image, the scanner will return the bi-tonal front image, then the front color image. Transport Timeout  allows you to set a transport timeout value. This value is the amount of time the scanner will wait after the last document enters the transport before the transport timeout action is taken. You can specify a time delay setting from 1 to 30 seconds. Energy Saving Features of Scanner  allows you to set the amount of time the scanner will remain inactive before the scanner goes into an idle state. Choices are: (none) and 5 to 60 minutes. The default is 15 minutes. Blank Image Detection - use the slider bar to specify the image size (KB), below which an image is determined to be blank. Images with sizes less than the size number you select will not be created. If you use this option, you must specify a blank image size for each image output type (Bi-tonal, Grayscale and Color) not just one. The default for this option is None, which means that you will keep all images. 50 A-61527 May 2006