Home » Konica Minolta Manuals » Multifunction Devices » Konica Minolta bizhub 4750 » Manual Viewer

Konica Minolta bizhub 4750 bizhub 4750/4050 Maintenance/Troubleshooting User G - Page 12

Replacement procedure, Replacing consumables, Front Cover, Toner Cartridge

View all Konica Minolta bizhub 4750 manuals

Add to My Manuals
Save this manual to your list of manuals

Page 12 highlights

2.2 Replacing consumables 2 Replacement procedure NOTICE Do not use a recycle Toner Cartridge other than our genuine product. A failure or problem that affects printing quality and that was caused due to use of a recycled Toner Cartridge is not covered by the warranty. Such a failure or problem is not subject to technical support. 1 Press the button on the right-hand side of this machine, then open the Front Cover. 2 Hold the handle of the Toner Cartridge, then pull it out. 3 Take a new Toner Cartridge out of the package bag, then remove all packaging materials. 4 Shake the new Toner Cartridge to equalize toner. NOTICE When replacing the Toner Cartridge, be careful not to spill any toner. If toner has spilled, immediately wipe it off using a soft and dry cloth. Do not leave the Imaging Unit on a place exposed to direct sunlight for 10 minutes or more. Long-term exposure will lead to reduced printing quality. [Maintenance/Troubleshooting] 2-4

Section	Page
Table of contents	2
1 Cleaning This Machine	5
1.1 Before getting started	5
1.2 Cleaning the outside of this machine	7
Control Panel	7
Exhaust Air Duct	7
Outer Covers	7
Original Glass	8
Original Cover Pad	8
2 Checking and Replacing Consumables	10
2.1 Checking the status of consumables	10
Consumables replacement messages	10
Checking the consumable level	10
2.2 Replacing consumables	11
2.2.1 Replacing a Toner Cartridge	11
Handling a Toner Cartridge	11
Storing Toner Cartridges	11
Replacement procedure	12
2.2.2 Replacing an Imaging Unit	13
2.2.3 Replacing a Staple Kit	15
3 Clearing Paper Jam and Staple Jam	19
3.1 To prevent a paper jam	19
3.2 When a paper jam has occurred	20
3.2.1 Clearing a paper jam in the Manual Feed Tray	20
3.2.2 Clearing a paper jam in Tray 1	21
3.2.3 Clearing a paper jam in Tray 2/3/4	22
3.2.4 Clearing a paper jam in ADF	23
3.2.5 Clearing a paper jam in the Front Cover	23
3.2.6 Clearing a paper jam in the Rear Cover	26
3.2.7 Clearing a paper jam in the Output Tray	27
3.2.8 Clearing a paper jam in the outlet of the Finisher	27
3.2.9 Clearing a paper jam in the rear of the Finisher	28
3.3 Troubleshooting for paper jam	30
3.4 Clearing a staple jam	32
4 Troubleshooting	35
4.1 The power is not turned on	35
4.2 The Touch Panel is not displayed	36
4.3 Cannot print	37
4.3.1 Cannot print	37
4.3.2 Problems on print quality	40
4.3.3 When the bit count does not match between the server and the client	41
4.4 Cannot perform network scanning	43
4.5 Cannot perform fax/internet fax	44
4.5.1 Cannot perform Fax TX	44
4.5.2 Cannot perform Fax RX	45
4.6 Cannot perform copy	46
4.7 Major messages and actions	48
Warning messages	48
Error messages	48
Service call	51
5 Checking the Counter	53