Konica Minolta bizhub 4750 bizhub 4750/4050 Maintenance/Troubleshooting User G - Page 50

4.7 Major messages and actions 4 Message [Writing Error] [Matching paper size not available.] [Out of the Range of Auto Zoom] [Place Original on Glass] [Place Original on ADF] [Duplex Copy Disabled] [Scan TX Failed] [Off-Hook] [Fax TX Failed] [Fax RX Failed] [I-Fax TX Failed] [I-Fax RX Failed] [E-mail forwarding failed.] [PC-FAX Restricted] [PC-Fax TX Error] [Polling RX Error] [Counter has reached its maximum allowance.] [Job Log Error] [Card Authentication Registration Error] [USB Connection Error] [Expiration Error] [Exceeds the no. of pages being stapled.] Description An error has occurred while saving data onto a USB memory device. Paper appropriate for a print job is not loaded in the tray. The auto zoom ratio setting exceeds the allowable range. The original of an invalid size is loaded on the ADF. No original is loaded on the ADF. The size of the loaded paper is not available for 2-sided copy. Scan transmission has failed. The handset remains picked up after a manual transmission. Fax transmission has failed. Fax receiving has failed. An error occurred while sending an Internet fax, and the job was not ended normally. An error occurred while receiving an Internet fax, and the job was not ended normally. An error occurred while forwarding the received fax by E-mail, and the job was ended normally. PC-Fax TX is prohibited. An error occurred when PC-Fax TX data was received on this machine. Multiple destinations have been specified for Polling RX. The counter has reached the upper limit. The job log storage area on the HDD is full. Failed to scan the IC card at the time of registration. The same type of USB device is connected. The enhanced server authentication application has expired. An attempt was made to print over the maximum number of sheets of paper that could be stapled. Remedy Cancel the job, then check that the USB memory is in the write enable state. Load the appropriate paper in the tray, then specify the correct size and type for the loaded paper on the Control Panel. Specify the zoom ratio between 25 and 400%. Scan the original from the Original Glass. Load the original on the ADF. Scan the original of different sizes from the ADF. Cancel 2-sided copy, or change the paper size. After a while, cancel the job. Replace the handset. This error is remedied automatically. This error is remedied automatically. This error is remedied automatically. This error is remedied automatically. This error is remedied automatically. Enable PC-Fax TX. This error is remedied automatically. Multiple destinations cannot be specified for Polling RX. Specify only one destination. Delete jobs. Delete job logs. This error is remedied automatically. Disconnect the USB device. Change to the authentication method other than the enhanced server authentication. Cancel the job, or release the staple setting. [Maintenance/Troubleshooting] 4-17