Konica Minolta bizhub C3100P bizhub C3100P Description of Utility Keys - Page 19

5.1 [SYSTEM SETTINGS] 5 5.1.7 [POWER SUPPLY] To display: [ADMIN SETTINGS] - [SYSTEM SETTINGS] - [POWER SUPPLY] Specify the operation in Sleep mode. Settings [CONSUMPTION] [ENERGY SAVER] [ENTER POWER] Description Select whether or not to reduce the power consumption in Sleep mode. • [ENABLED]: Further reduces the power consumption in Sleep mode. Se- lect [ENABLED] in normal conditions. • [DISABLED]: Select this option when a smooth network communication is not established while [ENABLED] is enabled. [ENABLED] is specified by default. Change the time period from when an operation has been completed on the machine until when it automatically enters Sleep mode. [1] minute is specified by default. When this machine receives a print job from a computer in Power Save mode, select the timing to switch to Power Save mode after the print job has completed. • [NORMAL]: Switches the machine status at the time specified in ENERGY SAVER. • [IMMEDIATELY]: Switches to Power Save mode immediately after a print job has ended. [IMMEDIATELY] is specified by default. 5.1.8 [WEEKLY TIMER] To display: [ADMIN SETTINGS] - [SYSTEM SETTINGS] - [WEEKLY TIMER] Select whether or not to automatically switch between power save and Normal mode using the weekly timer. To use the weekly timer, specify the schedule for switching between Power Save and Normal modes. Settings [ENABLE SETTINGS] [TIME SETTINGS] Description Specify whether or not to use the weekly timer. [ON] is specified by default. Specify the time for switching to the power saving mode ([OFF TIME]) and the time for returning to Normal mode ([ON TIME]) for each day of the week. • [ALL SETTING]: Collectively configure [OFF TIME] and [ON TIME] for all days of the week. After configuring [OFF TIME] and [ON TIME], select [ALL SET/CLEAR] - [SET]. • [SUNDAY] to [SATURDAY]: Configure [OFF TIME] and [ON TIME] for the selected day of the week. After configuring [OFF TIME] and [ON TIME], select [SET/CLEAR] - [SET]. 5.1.9 [SECURITY SETTINGS] [ADMIN PASSWORD] To display: [ADMIN SETTINGS] - [SYSTEM SETTINGS] - [SECURITY SETTINGS] - [ADMIN PASSWORD] If necessary, change the machine's administrator password. Be sure to remember the changed password so that you do not forget it. Enter the current administrator password before setting a new administrator password. [12345678] is specified by default. Tips If you enter an incorrect administrator password a configured number of times, you are prohibited from using this machine. In this case, turn this machine on and off. [Description of Utility Keys] 5-6