Konica Minolta bizhub C3100P bizhub C3100P Description of Utility Keys - Page 28

5.3 [EXPERT ADJUSTMENT] 5 Settings [IP ADDR. FILTER] [ACCESS PERMS] [ACCESS REFUSE] [IPV6] [ENABLE] [AUTO SETTING] [LINK LOCAL] [GLOBAL ADDRESS] [GATEWAY ADDRESS] Description Specify IP addresses that are permitted to access this machine and those that are refused access to the machine. Select whether or not to specify an IP address that allows an access to this machine in order to perform an access restriction. To specify the IP address, use Web Connection. For details, refer to Chapter 1 "Using Web Connection" in [User's Guide: Applied Functions]. [DISABLE] is specified by default. Select whether or not to specify an IP address that rejects an access to this machine in order to perform an access restriction. To specify the IP address, use Web Connection. For details, refer to Chapter 1 "Using Web Connection" in [User's Guide: Applied Functions]. [DISABLE] is specified by default. Assign an IP address (IPv6) to this machine. Select whether or not to use IPv6. [ON] is specified by default. Select whether or not to automatically assign the IPv6 global address of this machine. Selecting [ENABLE] automatically assigns the IPv6 global address based on the prefix length notified from the router and this machine's MAC address. [ENABLE] is specified by default. Displays the link-local address that is automatically specified from the MAC address of this machine. When manually specifying the IPv6 address, enter the IPv6 global address. When manually specifying the IPv6 address, enter the gateway address. [SPEED/DUPLEX] To display: [ADMIN SETTINGS] - [EXPERT ADJUSTMENT] - [ETHERNET] - [SPEED/DUPLEX] Select the network speed according to your environment. [AUTO] is specified by default. [IEEE802.1X] To display: [ADMIN SETTINGS] - [EXPERT ADJUSTMENT] - [ETHERNET] - [IEEE802.1X] Select whether or not to use IEEE802.1X authentication. To configure the IEEE802.1X detailed setting, use Web Connection. For details, refer to Chapter 1 "Using Web Connection" in [User's Guide: Applied Functions]. [DISABLE] is specified by default. 5.3.4 [PRINT DOCUMENT] To display: [ADMIN SETTINGS] - [EXPERT ADJUSTMENT] - [PRINT DOCUMENT] Select whether or not to enable to print files from USB memory. [ENABLE] is specified by default. Tips This function is available when an optional Hard Disk is installed. 5.3.5 [ADMIN DISPATCH] To display: [ADMIN SETTINGS] - [EXPERT ADJUSTMENT] - [ADMIN DISPATCH] When using a service that diagnoses the machine status remotely, send the machine's operating status to the remote diagnosis system. [Description of Utility Keys] 5-15