Konica Minolta bizhub C3110 bizhub C3110 Maintenance/Troubleshooting User Guid - Page 73

Error messages, Replace the Imaging Unit.] - replace waste toner box

Get Konica Minolta bizhub C3110 PDF manuals and user guides View all Konica Minolta bizhub C3110 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 73 highlights

4.7 Major messages and actions 4 Error messages If [Error Press] is displayed on the main screen, press the ) key on the Control Panel to display the error message in full screen mode. Message [Configuration has been changed.] [Power OFF and ON.] [Cover is Open] [Close properly.] [Misfeed detected.] [Install imaging unit.] [Install toner cartridge.] [Replace waste toner box.] [Replace the Imaging Unit.] [Replace Toner.] [Load papr or del] [PAPER EMPTY] [Incorrect Paper] [Remove paper from the output tray.] [Insufficient memory.] [Unable to save job.] [Stored job is not correct.] Description The option configuration was changed while the power was turned on. The cover is opened. A paper jam has occurred. The Imaging Unit is not installed correctly. The Toner Cartridge is not installed correctly. The Waste Toner Bottle has become full. The operating life of the Imaging Unit has expired. Toner is depleted. Paper of the specified size is not loaded into a tray. No paper is loaded in the tray. The size and type of the paper loaded in the tray specified from the printer driver are different from those of the paper loaded in the tray on the main unit. The size and type of the paper in the tray that are specified on the Control Panel do not match those of the paper actually loaded in the tray. The amount of paper output to the Output Tray has reached the maximum. Data has been received over the maximum memory size. The fax data storage area has become full. The hard disk has not been installed. When this machine is set in the enhanced security mode, a secured job has been sent without specifying the password from the computer. The option configuration is different from that specified when a job was saved. Remedy Restart this machine. Close the cover. Check a paper jam location, then remove the jammed paper. Correctly install the Imaging Unit, then close all doors. Insert and remove the Toner Cartridge, then close all the doors. For details, refer to page 2-3. Replace the Waste Toner Bottle. For details, refer to page 2-13. Replace the Imaging Unit. For details, refer to page 2-8. Replace the Toner Cartridge. For details, refer to page 2-3. Load the correct paper into the displayed tray. Add paper to the tray, or change the tray to make prints. Load the paper of the appropriate size and type into the tray, then specify the correct size and type for the loaded paper on the Control Panel. Load the paper of the appropriate size and type into the tray, then specify the correct size and type for the loaded paper on the Control Panel. Remove the paper from the Output Tray. Cancel the job to reduce the amount of data, then execute the job again. When sending fax data, send only the scanned original, or manually send it again. When receiving fax data, print or delete data saved in memory. This error is remedied automatically. Return to the option configuration specified when a job was saved. [Maintenance/Troubleshooting] 4-15

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
[Maintenance/Troubleshooting]
4-15
4.7
Major messages and actions
4
Error messages
If [Error Press] is displayed on the main screen, press the
)
key on the
Control Panel
to display the error
message in full screen mode.
Message
Description
Remedy
[Configuration has been
changed.]
[Power OFF and ON.]
The option configuration was
changed while the power was
turned on.
Restart this machine.
[Cover is Open]
[Close properly.]
The cover is opened.
Close the cover.
[Misfeed detected.]
A paper jam has occurred.
Check a paper jam location, then re-
move the jammed paper.
[Install imaging unit.]
The
Imaging Unit
is not installed
correctly.
Correctly install the
Imaging Unit
,
then close all doors.
[Install toner cartridge.]
The
Toner Cartridge
is not in-
stalled correctly.
Insert and remove the
Toner Car-
tridge
, then close all the doors.
For details, refer to page 2-3.
[Replace waste toner box.]
The
Waste Toner Bottle
has be-
come full.
Replace the
Waste Toner Bottle
.
For details, refer to page 2-13.
[Replace the Imaging Unit.]
The operating life of the
Imaging
Unit
has expired.
Replace the
Imaging Unit
.
For details, refer to page 2-8.
[Replace Toner.]
Toner is depleted.
Replace the
Toner Cartridge
.
For details, refer to page 2-3.
[Load papr or del]
Paper of the specified size is not
loaded into a tray.
Load the correct paper into the dis-
played tray.
[PAPER EMPTY]
No paper is loaded in the tray.
Add paper to the tray, or change the
tray to make prints.
[Incorrect Paper]
The size and type of the paper
loaded in the tray specified from
the printer driver are different
from those of the paper loaded in
the tray on the main unit.
Load the paper of the appropriate
size and type into the tray, then
specify the correct size and type for
the loaded paper on the
Control
Panel
.
The size and type of the paper in
the tray that are specified on the
Control Panel
do not match
those of the paper actually load-
ed in the tray.
Load the paper of the appropriate
size and type into the tray, then
specify the correct size and type for
the loaded paper on the
Control
Panel
.
[Remove paper from the out-
put tray.]
The amount of paper output to
the
Output Tray
has reached the
maximum.
Remove the paper from the
Output
Tray
.
[Insufficient memory.]
Data has been received over the
maximum memory size.
Cancel the job to reduce the amount
of data, then execute the job again.
The fax data storage area has
become full.
When sending fax data, send only
the scanned original, or manually
send it again.
When receiving fax data, print or de-
lete data saved in memory.
[Unable to save job.]
The hard disk has not been in-
stalled. When this machine is set
in the enhanced security mode, a
secured job has been sent with-
out specifying the password
from the computer.
This error is remedied automatically.
[Stored job is not correct.]
The option configuration is dif-
ferent from that specified when a
job was saved.
Return to the option configuration
specified when a job was saved.