Konica Minolta bizhub C360 bizhub C220/C280/C360 Enlarge Display Operations Us - Page 22

2.2 Loading originals 2 2.2 Loading originals Place the original in the ADF or on the Original Glass. Select the optimal position for setting the original according to the type of original to be copied. - By using the ADF, a multi-page original can be fed automatically one page at a time. The double-sided originals can also be scanned automatically. - When you are using the Original Glass, place the original directly on the Original Glass to scan. The original glass is best suited for books and originals that cannot be fed through the ADF. Reference - ADF is an option. Loading the original into the ADF 1 Slide the Lateral Guide to fit the size of the original. 2 Load the original face up in the Original Tray and arrange accord- ing to the scanning order. % Place the original pages so that the top of the original is toward the back side of the machine. % Do not stack originals exceeding the , mark. % If the document is loaded in any orientation other than with the top of the document toward the back of the machine, be sure to select the document orientation. 3 Slide the Lateral Guide against the edges of the original. Placing the original on the Original Glass 1 Lift open the ADF or the Original Cover 20 or more degrees. % Unless you lift the ADF more than 20 degrees to open it, the correct document size may not be detected. 2 Place the original face down on the Original Glass. % Place the original pages so that the top of the original is toward the back or the left side of the machine. % Align the original with the the Original Scale. mark in the back-left corner of % For transparent or translucent originals, place a blank sheet of paper of the same size as the original over the original. 3 Close the ADF or the Original Cover. bizhub C360/C280/C220 2-14