Konica Minolta bizhub C360 bizhub C220/C280/C360 Enlarge Display Operations Us - Page 26
In User Settings, you can select to display [Next Copy Job]. For details, refer to the [User's Guide
View all Konica Minolta bizhub C360 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
3.1 General copy operation 3 5 Press the Start key. The original is scanned and the data is copied. % To temporarily stop the copy operation, press the Stop key. % If [Ready to accept another job.] appears while printing a job, you can scan the next original. Reference - Some settings cannot be combined with each other. If they are combined improperly, the settings will be given priorities in either of the two ways described below. - The setting configured last is given priority. (The setting configured first is canceled.) - The setting configured first is given priority. (A warning message appears.) - In User Settings, you can select to display [Next Copy Job]. For details, refer to the [User's Guide Copy Operations]. - If an original with copy guard patterns embedded is scanned, the copy operation is stopped and the job is discarded. - If an original with a password embedded by the password copy function is scanned, the copy operation starts after you enter the password. - If multiple originals with different passwords are scanned at the same time, you will need to enter a password for each original. bizhub C360/C280/C220 3-3