Konica Minolta bizhub C360 bizhub C220/C280/C360 Enlarge Display Operations Us - Page 32
Finishing]
View all Konica Minolta bizhub C360 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
3.2 [Basic] Settings [Combine] [2in1] 3 Select this setting to print two original images on one sheet of paper. [Original Direction] [Original Binding Pos.] [Output Bind Direction] [Main Screen] [No] Select this setting to make no combined copy. When scanning double-sided originals or configuring double-sided or combined copy settings, specify the direction of the original to be loaded. For details, refer to page 3-15. When you have selected [2-Sided > 1-Sided] or [2-Sided > 2-Sided], enter the original binding position. For details, refer to page 3-13. When you have selected [1-Sided > 2-Sided] or [2-Sided > 2-Sided], enter the copy binding position. This can arrange the images in the front page and back page in the correct orientation. • [Auto]: The copy binding position is automatically set either at the top or at the left. A copy binding position along the long side of the paper is selected if the original length is 11-11/16 in (297 mm) or less. A copy binding position along the short side of the paper is selected if the original length exceeds 11-11/16 in (297 mm). Press this button to return to the basic settings screen with the changed settings applied. 3.2.5 [Finishing] Various settings can be selected for sorting and finishing copies fed into the Output Tray. 0 The "Staple" setting is available only if the optional finisher is installed. 0 The "Punch" setting is available only if the punch kit is installed on the optional Finisher FS-527. 0 The Half Fold and Center Staple & Fold functions are available only when the saddle stitcher is installed on the optional Finisher FS-527. 0 [Staple] cannot be used together with [Offset]. 0 [Half-Fold] and [Center Staple & Fold] cannot be used together with [Offset], [Staple], or [Punch]. % Press [Basic] ö [Finishing]. bizhub C360/C280/C220 3-9