Konica Minolta bizhub C360 bizhub C220/C280/C360 Enlarge Display Operations Us - Page 34

3.2 [Basic] Settings [Staple/Punch] 3 [Staple]: Copies can be bound with a staple in the corner or with two staples. [Fold/Bind] [Punch]: Copies can be fed out hole-punched. The number of punched holes varies depending on the country (area) where this machine is used. For details, contact your service representative. 1 1 1 [Position Setting] [Half-Fold] Select the desired staple or hole-punch position. • [Auto]: The staple or hole-punch position is automatically set either at the top or at the left. A staple or punch position along the long side of the paper is selected if the original length is 11-11/16 in (297 mm) or less. A staple or punch position along the short side of the paper is selected if the original length exceeds 11-11/16 in (297 mm). • If [Auto] is selected for the staple or holepunch position, load the original with the top toward the back of the machine. • If desired, press [Original Direction], and then specify the direction in which the original is loaded. Select this setting to fold copies at the center in half before feeding them out. [Center Staple & Fold] Select this setting to staple copies at the center before feeding them out. [Main Screen] Press this button to return to the basic settings screen with the changed settings applied. d Reference For details on the paper that can be half-folded, center stapled & folded, stapled, and punched, refer to [Us- er's Guide Copy Operations]. bizhub C360/C280/C220 3-11