Konica Minolta bizhub C550 bizhub C550 Print Operations User Manual - Page 406

Troubleshooting 11 11.2 Unable to specify desired settings or unable to print as specified Perform these troubleshooting procedures if you cannot specify the desired settings in the printer driver, or if the print results do not represent the settings that have been specified. 2 Note Some of the printer driver functions cannot be combined with other functions. Symptom Probable cause Action A printer driver setting Some functions cannot be com- Do not try to select settings that cannot be selected. bined. are not available. The "Conflicts" message with "Unable to Select" or "Function Canceled" appears. An incorrect combination of func- Check the settings and specify tions has been specified. the functions correctly. Printing is not performed as specified. Incorrect settings are specified. A combination of functions, although possible in the printer driver, is not possible with this machine. Check each setting in the printer driver. The paper size, orientation, and other settings specified in the application have priority over those specified in the printer driver. Enter the correct settings in the application. The watermark cannot The watermark is not correctly be printed. set. Check the watermark settings. The watermark density is set to a Check the density settings. level that is too low. Watermarks cannot be printed in No watermark can be printed in graphics applications. this case. The staple function cannot be specified. Stapling is not possible if "Paper Check each setting in the printer Type" is set to "Thick" or "Trans- driver. parency". The staple function requires optional finisher. Install the required optional finisher and enable it using the printer driver. Stapling cannot be performed. If are a large number of pages to be printed, stapling cannot be performed. Change the number of pages to be printed. Stapling is not possible if the doc- Check the document. ument contains pages of different sizes. C550 11-3