Konica Minolta bizhub C550 bizhub C550 Print Operations User Manual - Page 407

Troubleshooting 11 Symptom Probable cause Action The stapling position The orientation setting is not cor- Check the stapling position in the is not as expected. rect. printer driver setup dialog box. The hole punch function cannot be specified. Hole punching cannot be specified if "Booklet", "Transparency", "Thick2", "Thick3", or "Envelope" is selected. Check each setting in the printer driver. Optional finishers and punch kit are required. Install the required optional finisher and enable it using the printer driver. The pages are not punched. Printed pages may be fed out without being punched if the paper is loaded into the paper source with an incorrect orientation. Check the orientation setting. The hole punch position is not as expected. The orientation setting is not cor- Check the punch position in the rect. printer driver setup dialog box. The overlay is not printed properly. Available computer memory space is not sufficient. Simplify the overlay to reduce the data size. The image is not print- Available computer memory ed properly. space is not sufficient. Simplify the image to reduce the data size. Paper is not fed from the specified paper source. Paper will not be fed from the specified paper source if that paper source is loaded with paper of a different size or orientation. Load the paper source with paper of the appropriate size and orientation. C550 11-4